A Developed Polyester / Polyamide Filtering Fabric	G2-P-26	Ⅰ	H. Zhang, Z. Zhong and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
A Measurement Method for the Proportion of Natural Green Color Fibres in Blending Yarns	G2-P-01	Ⅲ	C. Li and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
A multi-scale simulation of fiber spinning utilizing primitive chain network simulations	S2-O-09	15:00	Y. Masubuchi	Institute for Chemical Research, Kyoto University
A New Safe Weight Level for Flammable Fabrics Based on the 16 CFR 1610 Standard	G4-P-04	Ⅲ	X. M. DING1, Y.L.ZHANG1, D. XUE1, X. Y. WU2	1Fashion Institute of Design, Donghua University 2Shanghai Entry-exit Inspection and Quarantine Bureau
A Novel and “Green” Route to Prepare Polyaniline-Montmorillonite Nanocomposites	SJ-O-06	11:00	Xiaofeng Jiang	Shanghai Zhongda Science & Technology Co.,Ltd,
A novel bioadhesive protein of silk filaments spun underwater by caddisfly larvae	S1-P-14	Ⅰ, Ⅲ	Yujun Wang and Masao Nakagaki	Department of Applied Biology, Faculty of Textile Science and Technology, Shinshu University
A Stack for Bullet-resistance Material	G4-P-21	Ⅱ	Juhea Kim, Mi Yeon Kwon, Jun Ho Park  and Eui Sang Yoo	Textile Fusion Technology R&D Department, Fusion Technology R&D Division, Korea Institute of Industrial Technology
A Study about the Formulation Technology of Enzyme and Its Pretreatment Effect on the T/C Fabric	SJ-O-18	17:00	Zhang Qing	Shanghai Textile Research Institute
A Study on high performance flame-retardant composite yarns	G4-P-11	Ⅰ	Kuo-Shu Lo, Ching-Iuan Su	Department of Polymer Engineering, Nation Taiwan University of Science and Technology
A Study on Immobilization of Gelatin onto PVDF/PAN Electrospun Membrane Containing Silver Nanoparticles	S3-P-05	Ⅱ	C.I. Su , B.D. Cheng and T.C. Lai	Dept. of Polymer Engineering, Nation Taiwan University of Science and Technology
A Study on Physical and Antibacterial Properties of Eco-Friendly Regenerated Bamboo Fiber/PLA Fiber Nonwovens	G6-P-09	Ⅰ	Ching-Wen Lin, Chin-Mei Lin and Fang-Yi Hsu	Graduated Institute of Fashion Design, Ling Tung University
A Study on Purchasing Practices, Wearing State and Satisfaction with Footwear of Diabetic Patients	G7-P-14	Ⅱ	J. Lee1 and Y. Kwon2	1Divisiont of Fashion Industry, Silla University 2Division of Fashion Industry, Silla University
A Study on the Deviation of the Physical Property of the Synthetic Filament for Industrial Use	G4-P-02	Ⅰ	S. J. Kim , J. H. Park and J. H. Kim	School of Textiles, Yeungnam University
Achievement of Project on the Development of High-Strength Poly(ethylene terephthalate) Fibers	S2-O-08	14:20	T. Kikutani	Dept. of Organic & Polymeric Materials, Graduate School of Sci. and Eng., Tokyo Institute of Technology
Adsorption Thermodynamics and Application Properties of Tea Polyphenols on Wool, Silk and Nylon	G3-P-03	Ⅱ	Ren-Cheng Tang 1,2, Hui Tang 2 and Cheng Yang 2	1National Engineering Laboratory for Modern Silk 2College of Textile and Clothing Engineering, Soochow University
Advanced Fiber Engineering Education in Shinshu University	S5-KO-01	9:15	Toshihiro Hirai	Divistion of Chemistry and Materials, Faculty of Textile Science and  Technology (FTST), Shinshu University
Alkali-hydrolysis analysis of a phthalimide-based azo disperse dye	G3-O-03	9:40	Minyoung Eom, Jieun Lee and Jooseok Koh	Department of Textile Engineering, Konkuk University
An Environmental Wear Trial on the Efficiency of PCM Cooling Vest	G5-O-05	10:40	L. C. Wang 1, H. C. Chou2, S. D. Tseng1, and G. T. Jou1	1Dept. of Testing and Certification, Taiwan Textile Research Institute 2Yun-lin Branch, Taiwan Textile Research Institute
An ILP-GA Based Approach for Nesting Scheduling in Carpet Weaving Industries	G8-P-06	Ⅲ	P. Payvandy1, M. Latifi2	1Yazd University, Textile Engineering Department 2Amirkabir University of Technology, Textile Engineering Department, Textile Research & Excellence Centers
An Intelligent Method for Determining the Spirality in Weft-knitted Fabrics	G2-P-28	Ⅲ	Hamidreza Sanjari1, Dariush Semnani1, Mohommad Sheikhzadeh1 and Ali Akbar Merati2	1Department of Textile Engineering, Isfahan University of Technology 2Advanced Textile Material and Technology Research Institute, Amirkabir University of Technology
An Investigation on Pore Size Parameters of Electrospun Nanoweb	S3-P-26	Ⅱ	R. Bagherzadeh1, M. Latifi2, and S. Shaikhzadeh Najar2	1Dept. of Textile Engineering, ATMT Research Institute, Amirkabir University of Technology 2Dept. of Textile Engineering, Amirkabir University of Technology
An Outlook of Smart Fibers	G5-P-04	Ⅱ	C. Yu and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Analysis of Air Jet Effect to Fiber on Melt-blown Process Using Computational Fluid Dynamics	G1-P-39	Ⅲ	T. Oiwa, S. Kobayashi and I. S. Kim	Faculty of Textile Science and Technology, Shinshu University
Analysis of birefringence of polymethacrylates with a polycyclic structure at the end of the side chain	G5-O-01	9:00	T. Mashima1, A. Tagaya2 and Y. Koike1,2	1Graduate School of Science and Technology, Keio University 2JST ERATO-SORST, JAPAN Science and Technology Agency
Analysis of ease influence on apparel fit	G7-P-13	Ⅰ	Shan Yufu1, Qian Xiaoming2, Huang Gu2, Wei Heyue2	1Dept. of Apparel Design and Enginnering, School of Art and Apparel, Tianjin Polytechnic University 2Dept. of Textile Enginnering, School of Textiles, Tianjin Polytechnic University
Analysis of ease influence on apparel fit	G7-P-28	Ⅰ	Shan Yufu1, Qian Xiaoming2, Huang Gu2, Wei Heyue2	1Dept. of Apparel Design and Enginnering, School of Art and Apparel, Tianjin Polytechnic University 2 Dept. of Textile Enginnering, School of Textiles, Tianjin Polytechnic University
Analysis of the Thermal Behavior and Mechanical Relaxation of Poly(L-lactic acid) Multifilament Yarns	G1-P-23	Ⅱ	M. Radjabian1, M. H. Kish1 and N. Mohammadi2	1Dept. of Textile Engineering, Amirkabir University of Technology (Tehran Polytechnic) 2Dept. of Polymer Engineering, Amirkabir University of Technology (Tehran Polytechnic)
Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair	G1-P-26	Ⅱ	X.-S. Xu1, Y. Shirakashi2, J. Ishibashi1, W. Takarada1, T. Kikutani1	1Department of Organic and Polymeric Materials, Graduate School of Science and Engineering, Tokyo Institute of Technology 2R&D Section, Production Management Department, Aderans Co., Ltd.
Animal Hairs found in the Textile Relics	G7-P-23	Ⅱ	Ok-Ja Chae, Hyun-Ah Kim and Hyo-Seon Ryu	Dept. of Clothing and Textiles, College of Human Ecology, Seoul National University
Anti-bacterial and Crease-Resist Finishing of Silk Fabrics with Chrysalis  Chitosan	G3-P-37	Ⅲ	Lixin Huang	Department of textiles, Jiaxing University
Anti-bacterial Property of Tussah Silk Fabric by Nano-titanium Dioxide and Chitosan Modification	G3-P-36	Ⅱ	Y. H. Lu1, X. Hao1, J. Lin1 and Z. D. Yang2	1College of Chemical and Material Engineering, Estern Liaoning University 2College of Foreign Language, Estern Liaoning University
Antimicrobial And Fastness Properties of Wool dyed With Natural Dye Extracted From Berberis Vulgaris Root	G3-O-16	15:20	Aminoddin Haji	Islamic Azad University, Birjand Branch
Anti-stabbing Properties of Woven Fabrics	G2-O-19	17:20	You Huh1, Duong Tu Tien2 and Jong S. Kim2	1Faculty of Mechanical and Industrial Systems Engineering, Kyunghee University 2Laboratory for Intelligent Process and Control, Kyunghee University
Application of calcium chloride hexahydrate as an inorganic phase change material with fabric	G5-P-31	Ⅱ	F.Mohaddes, M.H.Kish	Dept. of Textile Engineering, Amirkabir University of Technology Hfaez Ave.  Tehrasn
Application of Electrospun Nano-fibrous membrane in HEPA Composite Material	S3-O-05	11:40	C.I. Su, K.W. Lu, T.H. Kao and T.C. Lai	Dept. of Polymer Engineering, Nation Taiwan University of Science And Technology
Application of Protein Derivatives in Textile and Fibre Processing	S1-KO-03	15:00	Chris Carr	Textile Technology, The University of Manchester
Application of Robust Design in Improvement of Vacuum Twist Set of Polyester Filament Yarns	G2-O-04	10:00	Hamid Reza SHARAFAT, Mohammad Mehdi MAJIDI and Mohammad Esmail YAZDANSHENAS	Islamic Azad University, Yazd Branch
Applied sol-gel on micro-polyester fabric for deep coloring	G3-O-04	10:00	Hossein Barani1 and Shahram Peyvandi2	1Department of Textile Engineering, Islamic Azad University-Birjand Branch 2Department of Textile Engineering, Amirkabir University of Technology
Aquatic Propulsion Mechanism Using Fin with Variable Effective Length Spring - Thrust Characteristics during Heaving and Pitching Movement -	S1-P-19	Ⅰ, Ⅱ	M. Nakabayashi1, H. Soyano2, S. Kobayashi2, H. Morikawa2	1Dept. of Bioscience & Textile Technology, Interdisciphinary Graduate School of Science & Technology, Shinshu Universtiy 2Faculty of Textile Science & Technology, Shinshu University
Asian Textiles: Rebirth after MFA	G8-O-01	13:40	Kin-Fan AU and Eve Man-Hin CHAN	Institute of Textiles & Clothing, Hong Kong Polytechnic University
Asymmetric allylation or cyanosilylation reactions of aldehydes catalyzed by chiral phosphonamide derivatives bearing N-H bonds	G1-P-44	Ⅱ	Y. Morita, Y. Takii, A. Hamada, I. Yamamoto and T. Fujimoto	Department of Functional Polymer Science, Graduate School of Science and Technology, Shinshu University
Ballistic-resistant properties of metal fiber fabric laminate	G4-P-22	Ⅲ	Eui Sang Yoo, Young-Sook Cho and Juhea Kim	Textile Fusion Technology R&D Department, Korea Institute of Inderstrial Technology
Behavior of trans-Stilbene Unit in the Compensation of Birefringence :P(MMA/TSMA) and trans-Stilbene Doped PMMA	G5-O-02	9:20	H. Shafiee1, A. Tagaya1,2 and Y. Koike1,2	1Faculty of Science and Technology, Keio University 2Koike Photonics Polymer Project, ERATO-SORT, Japan Science and Technology Agency
Bending Behaviors of 2-ply Fabric Fastened with Stitches	G2-P-17	Ⅰ	M. Hanada, K. Matsunashi and K. Shimazaki	Dept. of Clothing, Faculty of Home Economics, Japan Women's University
Binding of an Acid and Reactive Dye with Ink-jet Pre-treatment Agent, Pullulan	S4-P-07	Ⅱ	K. Natsume, R. Yamada, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Bio-based Fibers: For Establishing a New Paradigm of Fiber Science and Technology	PL-03	16:00	Yoshiharu Kimura	Kyoto Institute of Technology, Japan
Bio-modification to Improve Hydrophilicity of Polyester/Wool blend Fabrics Using a New Cutinase	G3-P-29	Ⅰ	Mi-Kyung Kim1, Ha-Na Lee1, Seok-Han Yoon1, Byung-Kab Song1, Nam-Sik Yoon2 and Yang-Hoon Kim3	1R&D Team, R&D Division, Korea Dyeing Technology Center(DYETEC) 2Dept. of Textile System Engineering, College of Engineering, Kyungpook National University 3Dept. of Microbiology, College of Natural Science, Chungbuk National University
Body Shape Classification of Women's Torsos using Angles based on the New Bunka Style Basic Pattern	G7-O-02	11:00	Wookyung Lee1 and Haruki Imaoka2	1Graduate School of Humanities and Sciences, Nara Women's University 2Nara Women's University
Building of an energy production system using photosynthetic proteins	S1-P-22	Ⅰ, Ⅲ	T. Ueki and T. Hrai	Department of Bioscience and Textile Technology, Interdisciplinary Graduate School of Science and Technology, Shinshu University
Burning Behavior at LOI or Higher Oxygen Concentration of Flame Retarded Cotton Fabrics Treated with Inorganic Phosphates	G3-P-25	Ⅲ	M. Yoshida1, C. Mitani1, F.Masuko1 and  M. Sakamoto2	1Dept. of Clothing, Japan Women's University 2Tokyo Institute of Technology(Professor emeritus)
Carbon Nanotubes - Mass Production, Applications and Safe Innovation -	S3-KO-01	9:00	Morinobu Endo1,2, Yoong Ahm Kim1 and Takuya Hayashi1	1Dept. of Electrical and Electronic Engineering, Faculty of Engineering, Shinshu University 2Institute of Carbon Science & Technology, Faculty of Engineering, Shinshu University
Carrier Effect on Cationic Dyeing Properties of m-Aramid Fabric	G3-P-13	Ⅲ	Hae Rim Kim, Kee Jong Yoon and Jung Jin Lee	Dept. of Fiber System Engineering, Dankook University
Cellulosic Ethanol: Biofuel From Waste Cotton Garment	G6-O-04	10:00	Songmin Shang, Chi-ho Chan and Lei Zhu	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Changes in Fine Structure and Lamellae Arrangement of Fluorinated “Crystalline” Optical Fiber Candidate with Drawing	G1-O-09	16:00	Atsuhiro Fujimori	Dept. of Polymer Science and Engineering, Graduate School of Scicience and Engineering, Yamagata University
Characteristics and Dyeing Properties of Bamboo Colorants	G3-P-18	Ⅱ	Go Eun Jeong, Woo Hyo Jung and Jung soon Lee	Dept. of Clothing and Textiles, Textile Material, Chungnam National University
Characterization and Morphological Investigation of Electrospun PAN/SWNT Composite Nanofiber	S3-P-23	Ⅱ	H. Najdaki1, A.M. Shoushtari1 and N. Mohammadi 2	1Dept. of Textile Engineering, Amirkabir University of Technology (Polytechnic of Tehran) 2Dept. of Polymer Engineering, Amirkabir University of Technology (Polytechnic of Tehran)
Characterization of biocomposites from soy oil and kenaf fiber	G6-P-10	Ⅱ	Tae Sang Lee, Fang Fang Yuan, Hae Jin Jang and Seung Goo Lee	BK21 FTIT, Dept. of Organic Materials & Textile System Engineering, Chungnam National University
Characterization of Electrospun Non-woven Fabrics Prepared from Cellulose-Chitosan Composite	S3-P-24	Ⅲ	Hirokatsu Hanaoka1, Jun Araki2, Ayako Nishida3, and Kousaku Ohkawa1	1Institute of High Polymer Research, Faculty of Textile Science and Technology, Shinshu University 2International Young Researchers Empowerment Center, Shinshu University 3Division of Chemistry & Materials, Faculty of Textile Science and Technology, Shinshu University
Characterization of Electrospun Non-woven Fabrics Prepared from Hydroxypropyl Cellulose	S3-P-06	Ⅲ	K. Ohkawa1, V. Periasamy2, A. Nishida3 and J. Araki3	1Institute of High Polymer Research, Faculty of Textile Science and Technology, Shinshu University 2Dept. of Chemistry, Periyar University 3Division of Chemistry & Materials, Faculty of Textile Science and Technology, Shinshu University 4International Young Researchers Empowerment Center, Shinshu University
Characterization of Textile Fibers for Reinforcing Cement Composite Materials	G4-O-07	11:20	Hamidreza Pakravan1, Masoud Latifi1 and Masoud Jamshidi2	1Department of Textile Engineering ,Textile Research & Excellence Centers, Amirkabir University of Technology 2Department of Concrete, Building and Housing Research Center(BHRC)
Characterization of the fiber from wet-spinning of kappa-carrageenan solution	SJ-O-01	9:00	Isao Wataoka	The Center for Fiber and Textile Science, Kyoto Institute of Technology
Chemical and surface properties of Hansan Ramie irradiated by E-beam	G6-P-08	Ⅲ	Choi Hae Young and Lee Jung Soon	Dept. of Clothing & Textiles, Chungnam National University
Chemical Synthesis and Characterization of Electrically conductive Polythiophene using new medium	G1-P-13	Ⅰ	Soo Jung Yang, Sang Soo Jeon, Jun Kyu Park and Seung Soon Im	Dept. of Fiber & Polymer Engineering, Hanyang University
Chemically modified chitosan nano-nonwoven as scaffold for osteoblast	S1-P-24	Ⅰ, Ⅲ	Xuxu Bao, Yuan Li, A Teramoto, K Abe	Department of Functional Polymer, Faculty of Textile Science & Technology, Shinshu University
Clay-Based Nanopigments as a New Colorant for Coloration of Polypropylene	G3-P-24	Ⅱ	M. Validi1, S. Bazgir1, A. Rashidi1 and M.Yazdanshenas2	1Faculty of Technical and Engineerineg, Science and Research Branch, Islamic Azad University 2Faculty of Textile Engineerineg, Yazd Branch, Islamic Azad University
Clothing CAD Systems for Interactive Virtual Try-on and Real-time Simulation	G7-P-07	Ⅰ	P.Y. Mok1, Yuwei Meng1,2, Xiaogang Jin2	1Institute of Textiles & Clothing, The Hong Kong Polytechnic University 2State Key Lab of CAD & CD, Zhejiang University
Clothing Performance Evaluation of Electro-spinning Nano web at Various Conditions	G5-P-02	Ⅲ	Hae Wook Ahn1, Chung Hee Park2, Shim Myoung Hee1,3	1Dept. of Clothing and Textiles, Graduate School of Human Ecology, Seoul National University 2 Intelligent Textile System Research Center, Professor of Clothing and Textile, Seoul National University 3 Young Poong Filltex co.
Coir Fiber : The smart natural fiber with unique properties and multfarious applications	S8-KO-02	9:40	Febi Varghese1 and C.J. Thampi2	1Managing Director, KERAFED & Kerala State Coconut Development Corporation 2President T.M. Natural Resource Research and Development Centre
Coloration approaches toward super soft angora fibers	G3-P-06	Ⅱ	Young-Sung Kim1, Su-Ho Kim1, Nam-Sik Yoon2 and Young-A Son1	1BK21 FTIT, Dept. of Organic Materials and Textile System Engineering, Chungnam National University 2Dept. of Textile System Engineering, Kyungpook National University
Colour Yield of Cotton Knitted Fabric Made by Conventional and Torque-free Ring Spun Yarns	G3-O-06	11:00	M.L. Wan, C.W. Kan and K.F Choi	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Comparative Study on Wearing Color Change by Time in Korea and Japan	G8-P-05	Ⅱ	C.Mizutani1, H.Kim2and S.Park2	1Dept. of Clothing and Textile, Otsuma Women's University, 2School of Textiles, Yeungnam University
Compression Behavior of Acrylic Pile Carpet Consisting of Pile Yarn with Different Fiber Blend Ratio	G2-O-20	17:40	H.Sheikhi1, S.Shaikhzadeh Najar1, S.M.Etrati1, and M.Dayiary Bidgoly2	1Department of Textile Enginnering Amirkabir University of Technology 2Islamic Azad University, Kashan Branch
Compression molding of silk fiber reinforced fibroin composite	G6-O-02	9:20	H. Ino, L. Jin and T. Kimura	Dvi. of Advanced Fibro-Science, Graduate School of Science and Technology, Kyoto Institute of Technology
Compression shell buckling behavior of fused fabric composite	G2-P-22	Ⅲ	B.Namiranian, S.Shaikhzadeh Najar, and A. Salehzadeh Nobari	Department of Textile Engineering Amirkabir University of Technology
Compressive Properties of the Dense Connective Tissue in the Tail Fin of Dolphin	S1-P-20	Ⅰ, Ⅲ	Qilong Sun 1, Hirohisa Morikawa1, Shunichi Kobayashi1, Keiichi Ueda2and Hirokazu Miyahara2	1Faculty of Textile Science and Technology, Shinshu University 2 Okinawa Churaumi Aquarium, Okinawa
Compressive Residual Strength of Intraply Basalt/Nylon Hybrid Composite Laminates Subjected to Low-Velocity Impacts	G4-P-20	Ⅰ	M. Tehrani Dehkordi1, H. Nosraty1 , M. M. Shokrieh2 and G. Minak3	1Dept. of Textille Enginnering , Amirkabir University of Technology 2 Dept. of Mechanical Enginnering, Iran University of Science and Technology 3 Dept. of Mechanical Engineering, University of Bologna
Computer Aided Garment Design System for Made-to-Measure	G7-P-01	Ⅰ	J. Liu1 and H. Liu2	1Institute  of Art and Clothing, Tianjin Polytechnic University 2The Institute of Textiles, Tianjin Polytechnic University
Computer Simulation of Random Sphere Packing	G2-O-29	13:40	Hongqin Dai1, Lun bai1 , Kuihua Zhan2, Ziling Sun3 and Guoping Guan1	1College of Textile and Clothing Engineering, Soochow University 2College of Mechatronics Engineering, Soochow University 3 Medical College, Soochow University
Conducting Polymer Nano/Micro Structures: A Unique Polymer Nano/Micro Structures and Their New Fabrication Method	G1-KO-15	9:00	Seung Soon Im, Sang Soo Jeon and Jun Kyu Park	Dept. of Fiber & Polymer Engineering, Hanynag University
Conductive Polypyrrole / Polyacrylonitrile Composite Fibers	G1-O-14	17:40	H. Acar1, M. Karakışla2 and M. Saçak2	1UNAM- Institute of Materials Science and Nanotechnology, Bilkent University 2Department of Chemistry, Faculty of Science, Ankara University
Core-shell nano-, micro-particles for functional textiles	S8-KO-03	10:40	John Xin	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Crystal Thermal Expansion of Polyester Fibers on Elevating Temperatures	G1-P-40	Ⅰ	S.H. Lee1, A.R. Pyo2 and H.H.Cho2	1Dept. of Fashion Design, Dong-A University 2Dept. of Organic Material Science and Engineering, Pusan National University
Crystalline Phases of 316L Stainless Steel from Wire to Fiber	G1-O-23	14:00	S. J. Huang and T. W. Shyr	Institute of Textile Engineering, Feng Chia University
Crystallinity Changes in polypropylene Filaments Containing Organic pigments during UV Exposure	G1-O-05	14:20	Zahra Ahmadi1, Mohammad Haghighat Kish1 and Richard Kotek 2	1Amirkabir University of Technology, Textile Engineering Department 2College of Textile, Textile Engineering, chemistry and science  Department North Carolina State University
Crystallization of Isotactic Polypropylene from Mesomorphic Phase	G1-O-26	15:00	K. Nishida1, H. Asakawa1, G. Matsuba1,2, T. Kanaya1 and H. Ogawa3	1Institute for Chemical Research, Kyoto University 2Dept. of Polymer Science & Enginnering, Graduate School of Sciecne and Engineering, Yamagata University 3Japan Synchrotron Radiation Research Institute (JASRI)
Current Development and Application of Vectran® : Liquid Crystal Polymer Fiber	S2-O-06	13:40	Hideki Hoshiro	KURARAY CO., LTD.
Degradation of chitin by a novel bacterium Chitiniphilus shinanonensis originated from a bacterial community expressing a chitinolytic activity	S1-P-28	Ⅰ, Ⅲ	Kazuaki Sato, Arisa Shizume, Hideshi Aoyama, Yuichi Kato, Masahiro Nogawa, Goro Taguchi,and Makoto Shimosaka	Division of Applied Biology, Faculty of Textile Science and Technology, Shinshu University
Density Profiles of Thin Poly(methyl methacrylate) Films under Contact with Non-solvents	G1-P-22	Ⅰ	H. Atarashi1, K. Hori1, M. Hino2, T. Nagamura1 and K. Tanaka1	1Department of Applied Chemistry, Kyushu University 2Research Reactor Institute, Kyoto University
Deodorant Effect of Fabrics Treated with Green Tea Catechin	G3-P-38	Ⅰ	K.Kurahayashi1, H.Sakai2, K.Kajiwara3 and C.Mizutani1	1Dept. of Clothing and Textile, Otsuma Women's University 2Dept. of Materials Chemistry and Bioengineering,Oyaama National College of Technology 3Research Center for Textile Scienc, Kyoto Institute of Technology & NanoFIC, Shinshu University
Deodorization by Fibrous Wastes	S4-P-13	Ⅱ	H. Ikeda1, Y. Kamata1, H. Gocho1 and J. Komiyama2	1Dept. of Human Environmental Sciences, Faculty of Human Life Sciences, Jissen Women's University 2Prof. emeritus, Tokyo Institute of Technology
Design and Development of Drawing Frame for Pattern Blending	G2-O-03	9:40	S.M. Ishtiaque1, J.K. Chatterjee2, A.K. Battu1, Apurba Das1, V.K. Yadav1 and Narendra Kumar2	1Dept. of Textile Technology, Indian Institute of Technology Delhi 2Dept. of Electrical Engineering, Indian Institute of Technology Delhi
Design and Research of New Fibers Knitted Products	SJ-O-16	16:20	Shi Limin	Beijing Institute of Fashion Technology
Design and Weave Honeycomb Fabric Using Continuous Basalt Filament	G4-P-07	Ⅲ	D. Zhao, H. Liu , C. Liu and L. Shi	The Institute of Textiles, Tianjin Polytechnic University
Design of a geocomposite using mutliaxial warp knitted nonwovens for shore protection system	G4-O-03	9:40	Seung-Yeol Jeon1, Min Sun Kim2 and Woong-Ryeol Yu1	1Dept. of Materials Science & Engineering, College of Engineering, Seoul National University 2Textile Fusion Technology R&D Department, Korea Institute of Industrial Technology
Design of Birefringence-controlled Cellulose Derivatives	G5-O-04	10:00	N. Itabashi1, A. Tagaya2 and Y. Koike1,2	1Graduate School of Science and Technology, Keio University 2JST ERATO-SORST, JAPAN Science and Technology Agency
Design of Superhydrophobic Nanofibrous Surfaces by Nature Inspired Technology (Ⅲ)	S3-P-07	Ⅰ	M.S. Lee1 and W.H. Park2	1Research Institute of Advanced Materials, Chungnam National University 2Dept. of Advanced Organic Materials and Textile System, Chungnam National University
Development of  3D orthogonal woven structure for composite applications	G2-O-11	14:20	B. K. Behera and Gaurav Bajpei	Department of Textile Technology,Indian Institute of Technology Delhi
Development of Chitosan/Rosehip Oil Microcapsules for Cosmetic Textiles	G3-O-09	11:20	C.W.M. Yuen1, C.W. Kan1, C.H. Chui1, J.C.O. Tang2, K.K.L. Cheuk1, S.Y. Cheng1, W.Y.I. Tsoi1 and P.L. Lam1	1Institute of Textiles and Clothing, The Hong Kong Polytechnic University 2Dept. of Applied Biology and Chemical Technology, The Hong Kong Polytechnic University
Development of DSP-based Portable Fabric Density Measurement Apparatus	G2-P-19	Ⅲ	Zhang Changsheng, Ke Wei, Chen Yuxiang and Si Wei	College of Textile and Clothing Engineering of Soochow University
Development of Elastic Wear with Taping Effect on Increasing Metabolic Rate Caused by Light Exercise	G5-P-01	Ⅱ	Harumi Morooka1, Hideo Morooka2, Kiyoshi Toriumi1, and Kiyokazu Kitamura1	1 Faculty of Human Development, University of Toyama 2 Faculty of Textile Science & Technology, Shinshu University
Development of Long-staple Cotton, Color Cotton, Model and Cashmere Blending Yarn	G2-P-03	Ⅱ	X. Su and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Development of New Galators Formed by Cyclic(dipeptide) Derivative	G1-O-21	11:40	H. Hoshizawa, M. Suzuki, and K. Hanabusa	Interdisciplinary Graduate School of Science and Technology, Shinshu University
Development of New Galators Formed by Cyclic(dipeptide) Derivative	S1-P-16	Ⅰ, Ⅲ	H. Hoshizawa 1, M. Suzuki 1, and K. Hanabusa 1	International Fiber Engineering Course, Graduate School of Shinshu University
Development of PEN fiber	S2-O-07	14:00	D.Ozaki 1 and F.Terasaka2	1Dept.of Industrial Material R&D, Industrial Filament Technology Development section 2Teijin Fibers Limited
Development of Rapid and Large-scaled Synthesis of Carbon Nanotube from Non-woven Nanofibers	S3-P-12	Ⅲ	T. Ohta1, T. Ito1, L. Tauchi2, N.T.H. Dann2, K. Ohta2, B.S. Kim1 and I.S. Kim1	1Nano Fusion Technology Research Group, Faculty of Textile Science and Technology, Shinshu University 2Dept. of Functional Polymer Science, Faculty of Textile Science and Technology, Shinshu University
Development of System to Study a Air Leak Behavior of Mask Worn to Prevent Hay Fever	G7-O-08	14:40	M.Morishima1 , T.Uozumi2, and M.Kamijo3	1 Dept. of Design for Contemporary Life , Gifu City Women's College 2 Dept. of Computer Science and Systems Engineering, Muroran Institute of Technology 3 Interdisciplinary Graduate School of Science and Technology, Shinshu University
Development of Teijinconex® Nanofiber	S3-O-11	15:20	A. Kakazu, S. Imagawa	Aramid Application Development Section, Aramid Fibers R & D Department, Teijin Techno Products Limited
Development of Textile Base Composite Using Ultra-High Molecular Weight Polyethylene Fiber	S1-P-04	Ⅰ, Ⅲ	Y. Hua1, Q. Q. Ni2, A. Yamanaka3 and T. Natsuki2	1Graduate School, Interdisciplinary Division of Science and Technology, Shinshu University 2Dept. of Functional Machinery & Mechanics, Shinshu University 3Research Center of TOYOBO Co., Ltd.
Development of the novel technique for preparing the hydrophobic and oleophobic cotton textiles with the aqueous solution	G3-O-14	14:40	H. Noriyasu, Y. Okubo and K. Ogawa	Dept. of Advanced Material Science, Graduate School of Engineering, Kagawa University
Development of thermosensitive shape memory polyurethane foam	G5-P-08	Ⅲ	Seung Eun Chung1, Chung Hee Park2, Woong-Ryeol Yu3, Seok kin Hong4	1Dept. of Clothing and Textiles, Post Doctor of Human Ecology, Seoul National University 2 Intelligent Textile System Research Center, Professor of Clothing and Textiles, Seoul National University 3 Dept. of Materials Science and Engineering, Professor of Fiber and Polymer Science , Seoul National University 4 Dept. of Materials Science and Engineering, Graduate School of Engineering , Seoul National University
Developments of process and ink composition for antique document reproduction	G3-P-26	Ⅰ	Su-Ho Kim1, Young-Sung Kim1, Jong-Il Shin2, Kun Jun2, Soo-Youl Park2, Seung-Rim Shin2  and Young-A Son1	1BK21 FTIT, School of Applied Chemistry and Biological Engineering, Chungnam National University 2Bio Fine Chemical Research Center, Korea Research Institute of Chemical Technology, Colorant Chemical Research Team
Digital Textile Printing : Its History and Anticipation	S4-KO-01	13:40	Akira Ikeda	President, Mimaki Engineering Co., Ltd.
Discussion of the Connection between Brand Value and Consumers	G8-P-03	Ⅲ	Kao-Sheng Chen and Szu-Wei Sung	Graduate Institute of Fashion Design, Ling Tung University
Discussion on developing process of regenerated silk protein fiber	G1-P-14	Ⅱ	Baijun Xi1, Guo Xiaojie2	1College of Textile Engineering and Dress Designing, Shaoxing University 2College of Material Science and Chemical Engineering, Tianjin Polytechnic University
Disperse Dyeing of Polyester Microfibers	S4-P-05	Ⅲ	Y. Mitsuyo, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Dispersion and Diameter-selective Separation of Double Walled Carbon Nanotubes in an Aqueous DNA Solution	S1-P-08	Ⅰ, Ⅲ	Jin Hee Kim1, Masakazu Kataoka1, Yoong Ahm Kim1, Daisuke Shimamoto1, Hiroyuki Muramatsu1, Takuya Hayashi1, Morinobu Endo1, Mauricio Terrones2, Mildred S. Dresselhaus3	1Faculty of Engineering, Shinshu University 2Advanced Materials Department, IPICYT 3Massachusetts Institute of Technology
Dispersion of native cellulose nanofibrils by TEMPO-mediated oxidation and expression of the material properties	SJ-O-13	15:00	Tsuguyuki Saito	Graduate School of Agricultural & Life Sciences, The University of Tokyo
Dissipative Crystallization of Water-soluble Polymers	G1-O-24	14:20	T. Okubo1,2, A. Hagiwara3, H. Kitano3, J. Okamoto4, S. Takahashi4 and A. Tsuchida4	1Institute for Colloidal Organization 2Graduate School of Science and Engineering, Yamagata University 3Dept. of Applied Chemistry, Graduate School of Science and Engineering, University of Toyama 4Dept. of Applied Chemistry, Graduate School of Engineering, Gifu University
Dots, Lines, Surfaces and Structures	S8-KO-06	14:20	Anne Toomey1 and Raymond Oliver2	1Head of Dept. of Textiles, Royal College of Art 2Dept. of Textiles, Royal College of Art, London and Arrowscience Consulting
Durable Antimicrobial Finish of PET with 6-(1-anthra-quinonyl Amino) hexyldimethylammonium bromide	SJ-O-12	14:40	Liu Wenjing	School of Textile Engineering, Dalian Polytechnic University
Dyeability of Acid Dyes on Wool Fabrics Treated for Zero-AOX Shrinkproofing	S4-P-06	Ⅰ	N. Nagashima1, T. Takagishi2, K. Hamada3, and M. Tahara4	1Department of Clothing Science and Fine Arts, Tokyo Kasei Junior College 2Faculty of Home Economics, Tokyo Kasei University 3Faculty of Textile Sci. & Tech., Shinshu University 4Technology Research Institute of Osaka Prefecture
Dyeing and fastness properties of direct spun PET microfibers having flat shape cross-section	G3-P-12	Ⅱ	Ieesoek Jeong, Dongbin Kim, Minyoung Eom and Joonseok Koh	Department of Textile Engineering, Konkuk university
Dyeing behavior of cotton fabric with weld and madder natural dyeing plants	G3-P-07	Ⅲ	Aminoddin Haji , Hossein Barani	Islamic Azad University, Birjand Branch
Dyeing Behavior of Quercetin in Onionskin onto Wool	G3-P-02	Ⅰ	M. Maekawa1 and K. Kiyoe2	1Faculty of Human Life and Environment, Nara Women's University 2Graduate school of Human Culture, Nara Women's University
Dyeing of Hemp Woven Fabric with Reactive Dyes	G3-P-08	Ⅰ	Jung Jin Lee, Seung Hee Park, Hwa Nyoung Hur and Dong Sun Ji	Dept. of Fiber System Engineering, Dankook University
Dyeing Properties and Antimicrobial Activity of Silk Fabric with Extract of Unripe Citrus Unshiu Fruits with Extract of Unripe Citrus Unshiu Fruits	G3-P-35	Ⅰ	A. Lee, Y. Yang and E. Yi	Dept. of Clothing & Textiles, College of Natural Science, Jeju National University
Dyeing Properties of Reactive Disperse Dyes	S4-KO-02	14:20	S. D. Kim and J. L. Lee	Department of Textile Engineering, College of Engineering, Konkuk University
Dynamic Analysis of Yarn Twist Propagation and Variation in a Modified Low Torque Ring Spinning System	G2-O-05	10:40	Jie Feng, Bingang Xu and Xiaoming Tao	Institute of Textiles & Clothing, The Hong Kong Polytechnic University
Dynamic measurement of girdle pressure: changes due to posture and movement	G7-O-06	14:00	Y. N. Li, X. Q. Dai, Q. C. Zhang, J. Gao	College of Textile and Clothing Engineering, Soochow University
Eco-friendly Weighting of Silk Fiber by Grafting Chitosan	G3-O-17	15:40	S. Davarpanah, M. Arami and  S. H. Bahrami	Textile Engineering Department, Amirkabir University of Technology
Effect of Acid Pasting Process on Morphology of Copper Phthalocyanine Pigments	G3-P-23	Ⅰ	Eui Sang Yoo and Hyun Kyung Lee	Textile Fusion Technology R&D Department, Korea Institute of Inderstrial Technology
Effect of Air Suction Gun Geometry on Characteristics of Air Flow	G2-O-01	9:00	Y. Li, Y. Iemoto and S. Tanoue	Materials Science and Engineering, Graduate School of Engineering, University of Fukui
Effect of Color Management System on the dyeability in Digital Textile Prinintg	G3-P-17	Ⅰ	Soon Young Park, Yoon Cheol Park and Beom Soo Lee	Textile Fusion Technology R&D Department, Clothing & e-Color Technology Service Center, Korea Institute of Industrial Technology(KITECH)
Effect of DC Voltage Application and Metal Ion Addition on Catechinone Formation	S8-P-01	Ⅰ	Matsubara, T.; Yasunaga, H.; Urakawa, H.	Kyoto Institute of Technology, Department of Chemistry and Materials Technology
Effect of Dimethylolpropionic Acid on Synthesis and Preparation of Polyurethane Film	G5-O-10	14:00	Lv Haining1,2, Xu Yuan2 and Cai Zaisheng1	1Dept. of Textile Dyeing & Finishing, School of Chemistry and Chemical Engineering, Donghua University 2 Dept. of Textile Enginnering, College of Garment and Art Design, Jiaxing University
Effect of Environmental Condition on Filtration Performance of Electrically Charged Fibrous Assembly Materials	G5-O-09	13:40	Seung Keun Park and Chang Whan Joo	Dept. of Organic Materials and Textile System Engineering, Chungnam National University
Effect of environmental conditions on electric properties of electric conductive yarn	G5-P-06	Ⅰ	YoungJoo Jee, HongJae Kim, KwangNyun Cho, Sangwoo Jin and Youngmin Park	Research Development Division, Korea Sewing Technology Institute
Effect of Enzymatic Treatment on the Fabric Property of Cotton Denim Fabric	G3-P-39	Ⅱ	W.Y. Wong, C.W. Kan and C.W.M. Yuen	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Effect of Fiber Surface Modification on Structure and Mechanical Properties of Bamboo-PLA Composites	G6-O-01	9:00	Hongwei Ma and Chang Whan Joo	Dept. of Organic Materials and Textile System Engineering, Chungnam National University
Effect of Fibers on Crack-Resistance of Fiber Reinforced Concrete	G4-P-12	Ⅱ	Ching-Iuan Su1, Wen-Chuan Lai1, Chao Shiang-Wang2	1Department of Polymer Engineering, Nation Taiwan University of Science and Technology 2S.J. Tsair Liaw Co., Ltd. ChiaYi
Effect of Hot-plate drawing on structure and property of Poly(trimethylene terephthalate)	G1-P-31	Ⅰ	H.Zadeghasemi Ardakani, M. H. Seyedesfahani, S. H. Bahrami and S. Safapour	Department of Textile Engineering, Amirkabir University of Technology
Effect of Interlinings on mechanical properties of Garment materials	G7-O-14	17:00	K. O. Kim 1, M. Takatera 2	1Division of science of technology, Graduate school of Shinshu University 2Faculty of Textile Science and Technology, Shinshu University
Effect of Jacket Ventilation Design on Clothing Microenvironment	G7-P-06	Ⅲ	L. H. Kong, X. Q. Dai, Y. Y. Wan, and J. Ying	College of Textile and Clothing Engineering, Soochow University
Effect of Layer-by-Layer Treatment on Dyeability of Electrospun Nanofiber Nonwovens with Cationic and Anionic Dyes	S4-P-04	Ⅱ	T. Kozu, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Effect of Physical Properties of Sweat Absorbable Inner Cloth on Touch Sensation and Helmet Comfort	S1-P-01	Ⅰ, Ⅱ	EC. Kwon1, M. Kamijo1 and M. Takatera2	1Dept. of Bioscience and Textile Technology, Interdisciplinary Division of Science and Technology, Shinshu University 2Kansei Enginnering Course, Faculty of Textile Science and Technoloty, Shinshu University
Effect of Store Atmospherics on Consumer Emotions and Behavioral Responses	G7-O-01	10:40	TSZ KWAN SHIRLEY NG AND CHU WAI CHING	Hong Kong Polytechnic University
Effect of Synthesis Conditions on Morphology of Azo Pigment Particles	G3-P-22	Ⅲ	Eui Sang Yoo and Hee Sung Seo	Textile Fusion Technology R&D Department, Korea Institute of Industrial Technology
Effect of the structure of the thermal barrier on the thermal protection and comfort properties	G2-P-23	Ⅰ	Kyoung A Hong1, Seung Kook An2 and Kee Jong Yoon3	1Personal Protective Equipment Center, Dankook University 2Dept. of Organic Material Science and Engineering, Pusan National University 3 Dept. of Fiber System Enginnering, Dankook University
Effect of Tightness and Fabric Density on Moisture Permeability of Woven Cotton Fabrics	G2-P-16	Ⅲ	L. Yang and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Effect of Twist Level and Direction on Wrinkle Resistance of Plain Woven Fabrics	G2-O-13	15:00	Ali Akbar Merati1 and Hadi Patir2	1Advanced Textile Material and Technology Research Institute, Amirkabir University of Technology 2Textile Engineering Department, Yazd University
Effect of Weaving Method on the Performance of Applied Scissor in the Persian Carpet Weaving	G2-P-21	Ⅱ	Zahra Ahmadi	Iran National Carpet Center
Effect of Yarn Number on the Physical Properties of Woven Fabric Prepared with Hemp Spun Yarn	G2-P-11	Ⅰ	Min Su Hwang, Jung Jin Lee and Dong Sun Ji	Dept. of Fiber System Engineering, Dankook University
Effect of g-Ray Irradiation on Shape and Size of Surfactant Aggregation	S4-P-18	Ⅰ	K. Manno1, Y. Hirata1, T. Sato1, K. Hamada1 and S. Takahashi2, S. Hasegawa2 and Y. Maekawa2	1Faculty of Textile and Science and Technology, Shinshu University 2Quantum Beam Science Directorate, Japan Atomic Energy Agency
Effects of bentonite, sericin powder and phosphorus compounds on the thermal and fire properties of polyester nonwoven fabric	G3-P-31	Ⅲ	Parunee Kuenpong1 and Sireerat Charuchinda1, 2	1Dept. of Materials Science, Faculty of Science, Chulalongkorn University 2Center of Excellence for Petroleum, Petrochemicals, and Advanced Materials, Chulalongkorn University
Effects of Degree of Hydrolysis on Fibrous Poly(Vinyl Alcohol) (PVA) Membrane via Electrospinning	S3-P-13	Ⅰ	Takeru Ito1, Keun-Hyung Lee1,2, Kwan-Woo Kim1, Byoung-Suhk Kim*1, and Ick-Soo Kim*1,2	1 Nano Fusion Technology Research Group, Faculty of Textile Science & Technology, Shinshu University 2 Innovation Center for Nanotech Fibers, Faculty of Textile Science & Technology,Shinshu University,
Effects of Different Organic Solvents on the Liquefaction of Bamboo to Produce Chemical Feedstocks	G1-O-01	11:20	Joanne Yip, Meijuan Chen and Y.S. Szeto	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Effects of Movable Balloon Control Ring on the Hairiness of Yarn	G2-P-02	Ⅰ	J. Qiu, Z. Zhong, H. Guo and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Effects of MWNT Addition on the Propereties of Poly(phynylene sulfide) Films	G1-P-34	Ⅰ	Myong Jo Ham1, Young Ho Kim1, and Jeong Cheol Kim2	1Department of Organic Materials and Fiber Engineering, Soongsil University 2Materials and Parts Team, Korea Institute of Industrial Technology
Effects of Polystyrene-Organoclay on Disperse Dyeability and Mechanical Properties of Polypropylene-Clay Nanocomposite Fiber	G1-P-17	Ⅱ	N. Surajarus1, K. Srikulkit1,2, D. Pentrakoon1 and S. Limpanart2	1Dept. of Materials Science, Faculty of Science, Chulalongkorn University 2Metallurgy and Materials Science Research Institute, Chulalongkorn University
Effects of the Mechanical Properties of Polyurethane Fibers on the Fabrics	G2-O-26	11:00	M. Inoue1, J. Kojima2 and Y. Miyake2	1Dept. of Human Environmental Science, Graduate School of Humen Development and Environment, Kobe University 2Roica Division, Asahi Kasei Fibers Corporation
Elastic Fabrics Template of Sheath Dress Based on Dynamic Change	G7-P-12	Ⅲ	Lu Xin and Mu Hong	Dept. of ClothingDesign and Engineering, College Fashion and Textile, Eastern Liaoning University
Electric Capacitance Changes under Strain of Nanofiber/Vulcanized Rubber	S3-P-18	Ⅲ	L. Bao1, Y. Kumazaki1, D. Qian1 and N. Amino2	1Faculty of Textile Science and Technology, Shinshu University 2Yokohama Rubber Company, Ltd
Electrical Orientation for Cast Films of Cellulose Derivatives	G5-O-06	11:00	K. Tanaka, Y. Tanabe and R. Akiyama	Department of Macromolecular Science and Engineering, Graduate School of Science and Technology, Kyoto Institute of Technology
Electrical properties evaluation of recycle polypropylene nonwoven selvages complex ply yarn and woven fabrics	G2-P-39	Ⅱ	Ching Wen Lou1, Chueh Pin Chen2, An Pang Chen3 , Yi Chang Yang4 and Jia Horng Lin3,5	1Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Graduate Institute of Biomedical Materials and Engineering, Taipei Medical University 3 Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 4Fashion Styling and Management Shih Chien University 5Graduate Institute of Chinese Medical Science, China Madical University
Electroactive EG-treated PEDOT/PSS Paper Working in Air	G1-O-02	11:40	J. Zhou, M. Kimura	Dept. of Functional Polymer, Faculty of Textile Science and Technology, Shinshu University
Electroactive PEDOT/PSS-coated Cellulose Paper Actuator Working in Air	S1-P-17	Ⅰ, Ⅱ	J. Zhou, M. Kimura	Faculty of Textile Science and Technology, Shinshu University
Electrochemical Liquid Synthesis of MnO2 Fibrous Electrode for Lithium Battery Applications	G5-O-13	15:00	Wen-Hsien, Ho	Research and Development Section, Taiwan Textile Research Institute
Electromagnetic Wave Shielding Fabric Coated with PEDOT	G5-P-07	Ⅱ	Kyung Bin Im1, Jia Yiying1, Young Dong Kim2 and J. Y. Lee1	1School of Chemical Engineering, Sungkyunkwan University 2Paka RGB Co. Ltd.
Electron beam graft polymerization of polypropylene fiber to improve the surface property	S4-P-11	Ⅲ	Y.Yoshida1, I.Tabata2 , K.Hisada1 and T.Hori1	1Graduate School of Engineering , University of Fukui 2Technical Support Division, University of Fukui
Electron Beam-Induced Graft Copolymerization for Polypropylene Fabrics	S4-P-12	Ⅰ	Kenji Hisada1, Yuki Yoshida1, Teruo Hori1 and Yukie Kondo2	1Course of Fiber Ammenity Engineering, Graduate School of Engineering, University of Fukui 2Industrial Technology Center of Fukui Prefecture
Electrophysiological Correlates of Brand Names	G8-P-04	Ⅰ	Mei-chun Cheung1 and Agnes S. Chan2,3	1Institute of Textiles and Clothing, The Hong Kong Polytechnic University 2Department of Psychology, The Chinese University of Hong Kong 3Intergrative Neuropsychological Rehabilitation Centre, The Chinese University of Hong Kong
Electrospinning of Syndiotactic Polypropylene from a Polymer Solution at Ambient Temperatures	S3-O-12	16:00	K. Watanabe1, K.H. Lee2, O. Ohsawa1, I.S. Kim1, S.R. Givens3,  D.B. Chase3 and J.F. Rabolt3	1Dept, of Functional Machinery and Mechanics, Faculty of Textile Science and Technology, Shinshu University 2Collaborative Center for Nanotech Fibers, Faculty of Textile Science and Technology, Shinshu University 3Dept. of Materials Science and Engineering, University of Delaware
Electrospun Nanofibers From Polycaprolactone (PCL) For Tissue Engineering Scaffolds	G4-O-01	9:00	Y. Davoodpour and S. H. Bahrami	Textile Engineering Department, Amirkabir University of Technology
Enhancing Mechanical Properties of Gel-Spun Poly(vinyl alcohol) Fiber by Iodine Doping	S2-O-02	9:40	Ahmed Jalal Uddin, Tatsuya Narusawa, Chiemi Tomizawa, Atsushi Yamamoto and Yasuo Gotoh	Faculty of Textile Science and Technology, Shinshu University
Environmentally Benign Synthesis of Fluorinated Aromatic Polyether	G1-O-22	13:40	Y. Maruyama, K. Wakabayashi, S. Yamazaki and K. Kimura	Graduate School of Environmental Science, Okayama University
Evaluating the durability of Architectural Membranes	G4-O-02	9:20	J. H. Li1,2, C. N. Wang1, D. T. Feng1, G. T. Jou1 and C. C. Yen2	1Department of Testing of Certification, Taiwan Textile Research Institute 2Graduate school of Design Management, Ming Chuan University
Evaluating the Properties of Zinc-Eugenol / Low Melt PET Nonwoven Composite Material	G2-O-32	14:40	Shih Chi Liang1 ,Po Ching Lu2, Ching Wen Lou3, and Jia Horng Lin2	1Graduate Institute of Fashion Design, Ling Tung University 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 3Institute of Biomedical Engineering and Material Science / Center of General Education, Central Taiwan University of Science and Technology
Evaluation for Fitting Comfort of Nano-textile Glove	G7-P-18	Ⅲ	KANAI Hiroyuki1, TSUJI Hajime1, TAKESHITA Kouji2 and NISHIMATSU Toyonori1	1 Faculty of textile science and technology, Shinshu University 2 TEIJIN FIBERS LIMITED
Evaluation of dyeing property for nano composite fiber with Acid dyes	G3-P-14	Ⅰ	Hang Sung Cho and Beom Soo Lee	Textile Fusion Technology R&D Department, Clothing & e-Color Technology Service Center, Korea Institute of Industrial Technology(KITECH)
Evaluation of Functional Bamboo Charcoal Polyester/Stainless Steel Complex Yarn Knitted Fabrics	G2-P-33	Ⅱ	Jia Horng Lin1,2, An Pang Chen1, Wen Hao Hsing3, and Ching Wen Lou4	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Graduate Institute of Chinese Medical Science, China Madical University 3The Department of Textile Engineering, Chinese Culture University 4Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
Evaluation of New Azo Dyes as Chemosensors for Heavy Metals	G5-P-17	Ⅲ	Eun-yeong Heo, Sung-hoon Kim and Jin-Seok Bae	Dept. Of Textile System Engineering, Kyungpook National University
Evaluation of New Biocompatible Multi-Functional Phospholipid Agent for Textile Finishing	G3-P-42	Ⅱ	Youngil Ko, Chulwon Jung, Sung-Hoon Kim and Jin-Seok Bae	Department of Textile System Engineering, Kyungpook National University
Evaluation of Safety Vest for Hospital Patients	G7-P-16	Ⅰ	K.L. Yick1, K.Y. Lai2, S.F. Hau3, H.M. Tsui4 S.Y. Kwan4 and W.Y. Yip1	1Institute of Textiles and Clothing, The Hong Kong Polytechnic University 2 School of Nursing, The Hong Kong Polytechnic University 3 Department of Electronic and Information Engineering, The Hong Kong Polytechnic University 4 Kowloon Hospital, Hospital Authority
Evaluation of Synchronization Based Control for Motion Assist Using Neural Oscillator	S1-P-21	Ⅰ, Ⅱ	X. Zhang and M. Hashimoto	Interdisciplinary Graduate School of Shinshu University
Evaluation of Testing Standards for Torsional Distorsion in Knitted Fabrics	G2-P-13	Ⅲ	Y. Liu, H. Liu and K. Yang	The Institute of Textiles, Tianjin Polytechnic University
Evaluation of the Thermal Insulation Material of PP/PET/PU Nonwoven Composite Board	G2-O-30	14:00	Hung Jui Liang1, Pai Chen1, Jin Man Chen1, Jia Horng Lin1 and Ching Wen Lou2	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
Evaluation the manufacturing process for pectin/chitosan/PET composite dressing	G4-O-09	13:40	Chin Kai Lin1, Zong Han Wu2, Chao Tsang Lu3, Ching Wen Lou4 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University 3Institute of Life Sciences, Central Taiwan University of Science and Technology 4Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
Fabric Surface Patterns Evaluation by Image Analysis	G2-O-27	11:20	J. Militký1, M. Bleša1 and D. Křemenáková2	1Dept. of Textile Materials, Textile Faculty, Technical University of Liberec 2 Dept. of Textile Technologies, Textile Faculty, Technical University of Liberec
Fabrication and estimation of chemically modified chitin nano-nonwoven as scaffold for osteoblast	G5-P-30	Ⅰ	T Misawa, Xuxu Bao, A Teramoto, K Abe	Department of Functional Polymer, Faculty of Textile Science & Technology, Shinshu University
Fabrication and Formation Mechanism of Silver Nanowires	G1-P-48	Ⅲ	T. Tetsumoto1,2, Y. Gotoh1 and T. Ishiwatari1	1Interdisciplinary Graduate School of Science and Technology, Shinshu University 2Lintec Corporation
Fabrication and Gas Absorption Evalution of Porous Nanoweb-based Materials	S3-P-09	Ⅲ	S. Lee and C.W. Joo	Dept. of Organic Materials and Textile System Engineering, Chungnam National University
Fabrication and Physiochemical Characterization of Gallium Oxide Nanofibers Prepared by Electrospinning	S3-P-20	Ⅱ	Soo-Jin Parka1, Nasser A.M. Barakata1, Kwang-Un Jeongb2, Ick-Soo Kimc3 and Hak-Yong Kima1	1Center for Healthcare Technology & Development and Dept. of Organic Materials and Fiber Engineering 2Dept. of Polymer-Nano Science and Technology, Chonbuk National University 3Faculty of Textile Science & Technology, Shinshu University
Fabrication of High Refractive and Transparent TiO2/PMMA Hybrid Films	G5-O-11	14:20	K. Yoshinaga and S. Yamada	Dept. ofApplied Chemistry, Faculty of Engineering, Kyushu Institute of Technology
Fabrication of Hybrid Elastomer Film Consisting of Styrene-Butadiene-Styrene Block Copolymer and Silicone	G1-P-46	Ⅰ	A. Hashimoto, H. Endo, M. Nagura, and Y. Gotoh	Faculty of Textile Science and technology , Shinshu University
Fabrication of PVA/Acid-Treated CNT Composite Nanofiber via Electrospinning	S3-P-16	Ⅰ	Jian-Hua Xia, Takeru Ito, Tomohiro Ohta, Kwan-Woo Kim, Byoung-Suhk Kim and Ick-Soo Kim	Nano Fusion Technology Research Group, Department of Functional Machinery and Mechanics, Faculty of Textile Science and Technology, Shinshu University
Fabrication of Water-soluble Eggshell Membrane Nanofibers with Catechin by Electrospinning	S3-O-06	13:40	J. Kang, M. Kotaki and S. Sukigara	Dept. of Advanced Fibro-Science, Graduate School of Kyoto Institute of Technology
Fabrication Optimization of Ramie Nonwovens and Their Characterization	G2-P-36	Ⅱ	Jae Kyung Kim and Chang Whan Joo	Dept. of Organic Materials and Textile System Engineering, Chungnam National University
Factors Involved in Cellulose Synthesis in Acetic Acid Bacteria	S1-P-29	Ⅰ, Ⅱ	Akio Kumagai1, Masahiro Mizuno2, Kouichi Nozaki2, Takahisa Kanda2 and Yoshihiko Amano2	1Dept. of Bioscience & Textile Technology, Interdisciplinary Graduate School of Sci. & Technol., Shinshu University 2Dept. of Chemistry & Material Engineering, Faculty of Engineering, Shinshu University
Fascination, Investigation and Origination: Risk taking as the route  to creativity	S5-KO-03	10:30	Anne Toomey	Department of Textiles, Royal College of Art, London
Fiber Structure Development in Melt Spinning and Subsequent Drawing Processes of Poly(vinilidene fluoride)/Polypropylene Bicomponent Fibers	SJ-O-05	10:40	Wataru Takarada	Graduate School of Science and Engineering, Tokyo Institute of Technology
Fine Structure and Physical Properties of Poly(vinylidene fluoride)-Carbon Fiber Composite Films with Various Processing Conditions	G1-P-30	Ⅲ	S.H. Lee1 and H.H.Cho2	1Dept. of Fashion Design, Dong-A University 2Dept. of Organic Material Science and Engineering, Pusan National University
Finishing of silk by methacrylic acid (MAA) in the presence of sodium citrate and potassium peroxodisulphate under thermal treatment	G3-P-43	Ⅲ	Debasish Das and Abhijit Mukherjee	Department of fashion Technology, National Institute of Fashion Technology
Flame Retardancy of New Phosphorus Flame Retardant for Thermoplastic Polyester	G3-P-27	Ⅱ	Mi Yeon Kwon1, Han Byung Kim2, Keum Sook Yoo2 and Juhea Kim1	1Textile Fusion Technology R&D Department, Fusion Technology R&D Division, Korea Institute of Industrial Technology 2Technical Research Center, Poong Lim Oil Chemical co., LTD.
Flame Retardation of Plain Weave Fabrics Made of Polyacrylonitrile Pre-oxidized Yarns	G2-P-12	Ⅱ	L. Shi, H. Liu, and D. Zhao	The Institute of Textiles, Tianjin Polytechnic University
Flexible Photonic Crystal via Alumina Ball Inserted Teflon Tube	G1-P-36	Ⅲ	Yoshimi Watanabe, Takehiro Hotta, Hisashi Sato	Dept. of Engineering Physics, Electronics and Mechanics, Graduate School of Engineering, Nagoya Institute of Technology
Floating structure design and performance testing for fabric keyboard switch	SJ-O-14	15:20	R.Wang	College of textile, Tianjin Polytechnic University
Formulation of 1x1 rib unit loop configuration in flat bed knitting and dimensional stabilization of the fabric by using ultrasonic technique	G2-P-31	Ⅲ	Sandip Mukherjee1, Sadhan Chandra Ray2 and S.K.Punj3	1Departmentof Fashion Technology, National Institute of Fashion Technology 2Department of Fabric Manufacture, Institute of Jute Technology 3Department of Textile Technology, The Technological Institute of Textile & Sciences
Fracture Toughness and Structure Changes During Tensile Deformation of PET Fibers	S2-O-11	15:40	M. Shioya1, S. Sakurai2, K. Yamamoto3 and T. Kikutani1	1Dept. of Organic & Polymeric Materials, Graduate School of Science and Engineering, Tokyo Institute of Technology 2Dept. of Macromolecular Science & Enginnering, Graduate School of Sciecne and Technology, Kyoto Institute of Technology 3Dept. of Materials Science & Engineering, Nagoya Institute of Technology
From Weak Chaos Images to Inkjet Printing Textiles	G2-O-28	11:40	XuhongYANG 1, Bin MENG2, Xiaowei ZHANG1 and Xiaolan ZHAO1	1Collage of Textile and Clothing Engineering, Soochow University 2College of Textile and Garment , Hebei University of Science and Technology
Functional Nanofibre	S1-KO-02	14:20	Frank Ko	Advanced Fiber Materials & Process Engineering Lab., The University of British Columbia
Functional processing of a fabric by fixing of a cyclodextrin inclusion complex	S4-P-08	Ⅲ	K. Hirogaki 1, Jun Kamitani2, M. Kimizu3, T. Yamamoto3, E. Taguchi4, J. Kanenori4, K. Hisada1, and T. Hori1	1Fiber Amenity Engineering Course, Graduate School of Engineering, University of Fukui 2Textile/Life Department, Industrial Research Institute of Ishikawa 3Planning/Consultation Department, Industrial Research Institute of Ishikawa 4Research and Development Center, Komatsu Seiren Co., Ltd.
Functionalization of fiber materials using iodine	SJ-O-03	9:40	Yasuo Gotoh	Faculty of Textile Science & Technology, Shinshu University
Garment bagging using a 3D laser scanning method	G2-P-20	Ⅰ	Laikuen Chan1, Jinlian Hu 1, Zhenge Dong 1, M.S. Wong 2 and Siuping Chung1	1 Institute of Textiles and Clothing 2 Department of Health Technology and Informatics, The Hong Kong Polytechnic University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	Toshihiro Hirai	Faculty of Textile Science and Technology, Shinshu University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	Kanji Kajiwara	Faculty of Textile Science and Technology, Shinshu University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	A. Blanton Godfrey	College of Textiles, North Carolina State University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	Seung Soon Im	Division of Fiber and Polymer Engineering, College of Engineering, Hanyang University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	Xin Ding	School of Textile, Donghua University
Global Educational Collaboration for the Future Fiber Industry	S1	16:50 -18:30	Tao Xiao-Ming	The Institute of Textiles and Clothing, The Hong Kong Polytechnic University
GLOBAL WARMING DEMANDS NANO- UV PROTACTIVE FINISH ON APPAREL FABRIC NEED FOR HEALTH PROTECTION	G3-P-33	Ⅱ	Dr.Hireni Mankodi and Dr. Bipin Agarwal	Dept. of Textile Engineering, Faculty of Tech and Engg., M.S.University of Baroda
Graft polymerization of a porphyrin-derivative onto fabrics by electron beam irradiation method and their photo-induced hydrogen evolution properties	S4-P-10	Ⅱ	T.Koyama1, I.Tabata2, K.Hisada1 and T.Hori1	1Graduate School of Engineering, University of Fukui 2Techunical Department, University of Fukui
Hair Dyeing Colourant Prepared from Materials of Natural Origin by Enzymatic and Electrochemical Reaction	G3-O-19	16:20	YASUNAGA, H., UEDA, M.; FUKUI, Y., MATSUBARA, T. and URAKAWA, H.	Dept. Chemistry & Materials Technology, Kyoto Institute of Technology
Heavy metal removal by ion exchange fiber as an advanced technology	G5-O-15	15:40	M. Zargaran1, A.M. Shoushtari1, M. Abdouss2	1Textile engineering department, Amirkabir University of Technology 2Chemistry group, Amirkabir University of Technology
Heterogeneity of Internal Structure of Braided Composites	G4-O-05	10:40	Akio Ohtani and Asami Nakai	Advanced Fibro Science, Kyoto Institute of Technology
High speed melt spun PVDF multi-filament yarns : Analysis of the crystalline structure	G1-P-25	Ⅰ	S. Walter1, T. Gries1, G. Roth2, G. Seide1, C. Willner1, W. Steinmann1	1ITA Aachen - Institut für Textiltechnik, RWTH Aachen University 2Institut für Kristallographie, RWTH Aachen University, Aachen
Highly Efficient Solar Textiles	G5-P-21	Ⅰ	P.-C. Chen1, Y.-Y. Lin1, V. Tokarev2, H. Ilchuk2, I. Chernilevskyy2 and O. Shevchuk2	1Energy Textiles Section, Department of products,Taiwan Textile Reseach Institute 2Institute of Applied Mathematics and Fundamental Sciences, Lviv Polytechnic National University
High-strength Poly(ethylene terephthalate) Fiber  Produced by Spin-line Control of Conjugated Spinning	S2-O-10	15:20	Y. Ohkoshi1, K. Nakata2, F. Nakamura3, Y. Gotoh1, M. Nagura1, A. Hamano4, S. Takada5 and T. Kikutani6	1Faculty of Textile Science & Technology, Shinhsu University 2Idemitsu Co. Ltd. 3Toyo Tire & Rubber Co. Ltd. 4Totobo Co. Ltd. 5Toray Industories Inc. 6Dept. of Organic & Polymeric Materials, Graduate School of Science and Engineering, Tokyo Institute of Technology
Hydrocarbon Trap for Gasoline-Powered Vehicle	G4-P-25	Ⅲ	Yeong-Og Choi*, Min-Sun, Ki-Young Kim and Song-Jun Doh	Textile Fusion Technology R&D Department, Fusion Technology R&D Division, Korea Institute of Industrial Technology
Hydrolysis behavior of exo-and endo-type cellulases in degradation of cellulosic biomass	S1-P-30	Ⅰ, Ⅲ	Hiroto Nishijima1, Kouichi Nozaki2, Masahiro Mizuno2,Nobuaki Sato2, Takahisa Kanda2, and Yoshihiko Amano2	1Dept. of Bioscience & Textile Technology, Interdisciplinary Graduate School of Sci. and Technol. Shinshu University 2Dept of Chemistry & Material Engineering, Faculty of Engineering, Shinshu University
Identification of Fiber Mixtures by Infrared spectroscopy and SIMCA	G2-P-07	Ⅲ	T. Miki1, S. Tokutake2 and H. Ishizawa2	1Japan Textile Products Quality and Technology Center 2Shinshu University
Identification of Natural Dyes in Persian Carpet	G3-O-08	11:40	Zahra Ahmadi1and Mahdi Safi2	1Iran National Carpet Center 2Institute for Colourants. Paint and Coating
Impedance Properties and Actuation Behavior of Plasticized Polyvinyl Chloride Gels	S1-P-13	Ⅰ, Ⅱ	H. Xia1 and T. Hirai1	Smart Materials Engineering, Faculty of Textile science and Technology, Shinshu University
Implementation of Friction in the Garment Simulation System	G7-O-05	13:40	I. Yamamoto1,  and H. Imaoka 2	1Dept. of Fashion and Living Designs, Junior College Division, Mukogawa Women's University 2Dept. of Health Science and Clothing Environment, Faculty of Human Life and Environment, Nara Women's University
Impregnation of Metal Complex into Epoxy Insulation Materials Using Supercritical Carbon Dioxide and Its Application for Copper Plating	G3-P-20	Ⅰ	H. Ohnuki1, S. Sumi2 and T. Hori1	1Graduate School of Engineering, University of Fukui 2Guangzou Meadville Electronics Co., Ltd.
Improved Discrimination and Prediction of Drapability of Fabrics	G2-O-15	16:00	Surinder Tandon1 and Mitsuo Matsudaira2	1AgResearch Limited 2Kanazawa University
Improvement in Dyeing Property of Polyethylene Fabric	G3-P-09	Ⅱ	Mei-Shan Hu1, Chyung-Chyung Wang2 and Jen-Taut Yen3	1Department of Material and Fiber, Nanya Institute of Technology 2Department of Textile Engineering, Chinese Culture University 3Department of Polymer Engineering, National Taiwan University of Science
Improvement in Water Absorption, Adhesive and Painting Properties of Ultra-high Molecular Weight Polyethylene and Other Polymeric Materials	G3-O-15	15:00	Hitoshi Kanazawa, Jun Sato and Aya Inada	Dept. of Industrial Systems,Faculty of Symbiotic Systems Science, Fukushima University
Improvement of Antimicrobial Property of Cotton Fabric with Galangal Essential Oil and Galangal Extracts	G3-P-34	Ⅲ	J. Chaliewsak1 and S. Charuchinda1, 2	1Dept. of Materials Science, Faculty of Science, Chulalongkorn University 2Research Unit of Advanced Ceramics and Polymeric Materials, National Center of Excellence for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University
IMPROVEMENT OF SIZING COMPOSITION USING TAGUCHI METHOD	G2-P-30	Ⅱ	Hamid Reza Sharafat and Mohammad Saleh Owlia	JAVAD Higher Education Institute
Improvements of Process and Resulted Properties of Ultra-High Molecular Weight Polyethylene Gel-Spun Fiber by Applying Modified Carbon Nano-fiber	S2-KO-05	11:20	Yasuo Ohta1, Nobuyuki Taniguchi1,Xuming Chen2, Benjamin S. Hsiao2 and Benjamin Chu2	1TOYOBO CO., LTD. 2Dept. of Chemistry, Stony Brook University
Individual Pattern Making of Pants using 3D Human Body Shapes	G7-P-05	Ⅱ	Y.S. Cho1, K. Tsuchiya2, M. Takatera2	1Textile fusion technology R&D Department, Korea Institute of Industrial Technology 2Faculty of Textile Science and Technology, Shinshu University
Influence of Fiber Length Distribution and the Drafting Conditions on the Thickness Variation of Roller Drafted Sliver	G2-O-02	9:20	Jong S. Kim1, Jung H. Lim2 and You Huh3	1College of Engineering, Kyunghee University 2Dept. of Textile Engineering, Graduate School, Kyunghee University 3Dept. of Mechanical Engineering, Kyunghee University
Influence of Heat-setting Process on the Yarn Shrinkage of PLA Fibre	G6-P01	Ⅱ	C.W. Kan and C.W.M. Yuen	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Influence of Heat-setting Process on the Yarn Strength of PLA Fibre	G6-P-02	Ⅲ	C.W. Kan and C.W.M. Yuen	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Influence of Laser Treatment on Some Properties of Denim Fabric	G3-O-11	13:40	C.W. Cheng, C.W. Kan and C.W.M. Yuen	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Influence of Non-aqueous Finishing Process on the Wrinkle Properties of Cotton Fibre	G3-P-40	Ⅲ	C.H. Au, Y.L. Lam, C.W. Kan and C.W.M. Yuen	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Influence of Stretching and Metal Contact to the Crystallization Behavior of Polytetrafluoroethylene	G1-P-38	Ⅱ	S. Kondo, T. Kanazawa, Y. Matsuda and S. Tasaka	Dept. of Materials Science & Chemical Engineering, Faculty of Engineering Shizuoka University
Influence of thermal treatment on the impregnation of metal complexes into aramid film using supercritical carbon dioxide and its electroless copper plating	S4-P-09	Ⅰ	Magali Belmas1, Isao Tabata2, Kenji Hisada1 and Teruo Hori1	1Graduate School of Engineering, University of Fukui 2Technical Support Division, University of Fukui
Initial Structure Development in the CO2 Laser Drawing for Polypropylene Fiber	G1-O-03	13:40	YoungAh Kang1, KyoungHou Kim2, Soichiro Ikehata1, Ryo Aida1, Yutaka Ohkoshi1, Yasuo Gotoh1, Masanobu Nagura1, Isao Wataoka3 and Hiroshi Urakawa3	1Faculty of Textile Science and Technology, Shinshu University 2Collaborative Innovation Center for Nanotech FIBER (nanoFIC), Shinshu University 3Faculty of Engineering and Design, Kyoto Institute of Technology
In-Line Atmospheric Plasma Processing using Nano-Sized Aerosols	S4-KO-06	17:20	D. Vangeneugden, R. Rego, M. Dubreuil, A. Vanhulsel, B. Verheyde, R. Dams, S. Paulussen	Plasma Technology Group, Materials Unit, VITO – Flemish Institute for Technological Research
Innovations in Fibre Reinforced Composites at K. U. Leuven: a Review	S4-KO-07	9:00	I. Verpoest, S. Lomov, A.W. Van Vuure, L. Gorbatikh	Departement of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven
Inquisition on Clothing Craft Production List Formulation Method Based on CorelDRAW Software	G7-P-24	Ⅲ	Mu Hong and Lu Xin	Dept. of Clothing Design and Engineering, College Fashion and Textile, Eastern Liaoning University
Interaction between Acid Dyes and Additives in Inkjet Ink	S1-P-12	Ⅰ, Ⅲ	J. Y. Park, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Interfacial adhesion of the aramid/chloroprene rubber with UV treatment and water sorption	G4-P-09	Ⅱ	Ji Hyun Sim, Tae Sang Lee, Book Sung Kim and Seung Goo Lee	BK21 FTIT, Dept. of Advanced Organic Materials & Textile System Engineering,Chungnam National University
Interior Jacquard Fabric Development Using Spinning blended Ramie fabric and EAT Program	G2-P-40	Ⅲ	Hyo Jung Woo,Go Eun Jeoung and Jung soon Lee	Dept. of Clothing and Textiles, Textile Material, Chungnam National University
Internal Structure and Mechanical Properties of Twisted Structures	G4-P-06	Ⅱ	Asami Nakai, Akio Ohtani, Satoshi Okumura, Mio Arai, Masashi Kume, Takayuki Sakai, Ryo Marui, Hiroyuki Hamada	Advanced Fibro Science, Kyoto Institute of Technology
Investigating the Application of Fashion Color Using a New Color Image Space	G7-P-22	Ⅰ	Wen-Guey Kuo1 Yung-Pong Tsai 1 Shang-Ming Lin 2 Chi-Chu Hung3 Hsuan-Yu Hung3	1 Department of Textile Engineering, Chinese Culture University 2 Department of Materials and Textiles, Oriental Institute of Technology 3 Mei Cha Mei Finishing Co. Ltd.
Investigation and Optimization of Yarn Twisting Efficiency and Spinnability in a Modified Low Torque Ring Spinning System	G2-O-22	9:20	Jie Feng, Bingang Xu and Xiaoming Tao	Institute of Textiles & Clothing, The Hong Kong Polytechnic University
Investigation of synthesis and dyeing properties of novel acid dye based on naphthalimide and comparison of its properties with azobenzene derivatives on polyamides	G3-O-02	9:20	M. Hossein Nezhaad1, A.Khosravi1, K. Gharanjig2 and S. Moradian1	1Amirkabir University of Technology, Faculty of polymer and color engineering 2Institute for colorants, paint and coatings, Department of Organic colorants, Corresponding author
Kevlar(R) aramid fiber and its applications	S2-O-03	10:00	Tomohiro Fujimatsu	DuPont-Toray Co., Ltd. "Kevlar" Product & Application Technology Dept.
Knowledge-based Interactive Design for Men's Suit	G7-O-03	11:20	Hong Lu, Yan Chen, Hongqin Dai	Department of Clothing Design and Engineering, College of Textile and Clothing Engineering, Soochow University
Laser Impact on Grey Cotton Fabric	G3-O-12	14:00	C.W. Kan, Y.L. Chow, C.K. Chan and C.W.M. Yuen	Institute of Textile and Clothing, The Hong Kong Polytechnic University
Laterally Compressed Characteristics of Multi-filament Yarn	G2-O-06	11:00	T. Kinari1, T. Shimokawa1 and K. Ohta2	1Dept. of Mechanical Engineering, College of Science and Engineering, Kanazawa University 2Owari Textile Research Center, Aichi Industrial Technology Institute
Levelness properties of Hemp blends fabrics	G2-P-18	Ⅱ	Jieun Lee, Sung-eun Kim, Hyungsup Kim and Joonseok Koh	Department of Textile Engineering, Konkuk university
Liquid Permeability Control of Crazed Polylactic Acid Film by Titania	G5-P-13	Ⅱ	T. Hirama, S. Okubo, T. Yokoi, A. Takeno and M. Miwa	Dept. of Materials Science and Technology, Faculty of Engineering, Gifu University
Managing University-industry Research Collaboration - Insights from Textile Innovation Projects	G8-O-05	15:00	Krista K.B. Ko1, Chester K.M. To1, W.T. Ngai2, Z.M. Zhang1, Jimmy M.T. Chang1	1Institute of Textiles and Clothing, The Hong Kong Polytechnic University 2Department of Management & Marketing, The Hong Kong Polytechnic University
Manufacture Technique and Electrical Properties Evaluation of Bamboo Charcoal Polyester/Stainless Steel Complex Yarn Knitted Fabrics	G2-O-25	10:40	An Pang Chen 1 ,Ching Wen Lou2 Chien Teng Hsieh3 and Jia Horng Lin 1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 3 Department of Fashion Design and Merchandising, Shih Chien University
Manufacture technique and physical properties evaluation of functional polypropylene nonwoven selvages complex ply yarn and knitted fabrics	G2-P-34	Ⅲ	Chueh Pin Chen1, An Pang Chen2, Ching Wen Lou3 ,Yi Chang Yang4 and Jia Horng Lin2,5	1Graduate Institute of Biomedical Materials and Engineering, Taipei Medical University 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 3Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 4Fashion Styling and Management Shih Chien University 5Graduate Institute of Chinese Medical Science, China Madical University
Manufacturing Process and Properties Evaluation of anti electromagnetic/far Infrared ray for complex nonwoven	G2-P-38	Ⅰ	Chin Mei Lin 1, Yu Tien Huang1 ,R. S. Yao2, Ching-Hui Lin3	1Graduate Institute of Fashion Design, Ling Tung University 2Taiwan Textile Research Institute 3Department of Fashion Design, Ling Tung University
Manufacturing process evaluation of Functional sodium alginate wound dressing	G4-O-14	15:20	Chieh Yu Chao1, Ching Wen Lou2, Hsing Wen Sung3, and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 3Department of Chemical Engineering, National Tsing Hua University
Manufacturing Process of poly (lactic acid)/chitosan porous composites with hydroxyapatite	G4-O-12	14:40	Chih Hung He1, Chin Kai Lin1, Jia Horng Lin1 and Ching Wen Lou2	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
Measurement and Evaluation of Visual Impression on Woven Fabric	SJ-O-15	16:00	Hiroyuki Kanai	Faculty of Textile Science and Technology, Shinshu University
Measurement of Birefringence Variation during Sequential Biaxial Stretching of PET Film	G1-O-19	11:00	R. Aoki1, S. Nakai2, W. Takarada1 and T. Kikutani1	1Dept. of Organic & Polymeric Materials, Graduate School of Sci.and Eng., Tokyo Institute of Technology 2Production Engineering & Development Center, FUJIFILM Co., Ltd.
Measurement of Residual Stresses in Film Insert Molded Parts with Complex Geometry	G5-P-14	Ⅲ	Seong Yun Kim, Chae Hwan Kim, Sung Ho Kim, Hwa Jin Oh, Jae Ryoun Youn	Department of Materials Science and Engineering, Seoul National University
Measurement of VOCs in car seat fabric made by conventional process	G3-P-47	Ⅰ	Yoon Cheol Park and Jae Yun Shim	Textile Fusion Technology R&D Dept., e-Color Technology Service Center, Korea Institute of Industrial Technology (KITECH)
Measures for brand knowledge: Comparison of testing formats, languages and product categories	G8-O-06	15:20	Mei-chun Cheung1 and Agnes S. Chan2,3	1Institute of Textiles and Clothing, The Hong Kong Polytechnic University 2Department of Psychology, The Chinese University of Hong Kong 3Intergrative Neuropsychological Rehabilitation Centre, The Chinese University of Hong Kong
Mechanical Effect of Silane-Film Former Treatment of p-Aramid Fiber on Its Composites	G4-P-15	Ⅱ	N. Ikuta1, E. Shirota2, M. Takiwaki2, F. Funami2, K. Kosuge3, K. Gotoh4 and H. Hatta4	1Department of Materials. Engineering, Shonan Institute of Technology 2Graduate School of Engineering, Shonan Institute of Technology 3Dupon-Torey Co., Ltd. 4Institute of Space and Astronautical Science, Japan Aerspace Exploraton Agencdy (ISAS/JAXA)
Mechanical Force -Induced Crystalline Transformation of Electrospun Fibrous Poly(1-butene) Membrane	S3-P-10	Ⅰ	D. Kimura1, K.W. Kim2, K.H. Lee2, B.S. Kim2 and I.S. Kim2	1Graduate school of Functional Machinery & Mechanics, Faculty of Textile Science & Engineering, Shinshu University 2Dept. of Functional Machinery & Mechanics, Faculty of Textile Science & Engineering, Shinshu University
Mechanical Properties and Fracture Behavior of Natural Fiber Reinforced Thermoplastics Injection Moldings	G4-P-14	Ⅰ	T. Morii1, T. Ohta2 and H. Hamada2	1Dept. of Materials Science & Engineering, Shonan Institute of Technology 2Division of Fibro-Science, Graduate School, Kyoto Institute of Technology
Mechanical Property and Handle of Chirimen Fabrics for Ladies' Thin Dress	G7-P-10	Ⅰ	H. Yokura1, and S. Sukigara2	1Dept. of Home Economics, Faculty of Education, Shiga University 2Dept. of Advanced Fibro Science, Graduate School of Science and Engineering, Kyoto Institute of Technology
Mechanical Property Measurements of Nano/micron-size Fibers	S3-P-03	Ⅲ	M. Nagase1, I.S. Kim1, Y. Enomoto1,2, Y. Ohgawara3, Y. Kaga3, Y. Osawa3, and T. Takahashi3	1Faculty of Textile Science and Technology, Shinshu University 2Toyama Industrial Technology Center 3Rhesca Co. Ltd
Mechanism on Production of Bio-Thermoset Resin from Wool Powder	S4-P-17	Ⅲ	N. Ikuta1, N. Aihara2, M. Hikida2, F. Funami2 and J. Koga3	1Department of Materials Engineering, Shonan Institute of Technology 2Graduate School of Engineering, Shonan Institute of Technology 3Department of Home Science, Kyoto Women's University
Melt Spinning of Thermo-plasticized Cellulose Derivative	G1-O-11	16:40	Y. Aranishi1, H. Yamada1, H. Kano1, T. Sasamoto1 and Y. Nishio2	1Fibers and Textiles Research Laboratories, Toray Industries, Inc. 2Division of Forest and Biomaterials Science, Graduate School of Agriculture, Kyoto University
Mesophase and Fiber Structure Development of PEN Fiber on the Continuous CO2 Laser Drawing Process	G1-P-45	Ⅲ	Ryo Aida1, KyoungHou Kim2, YoungAh Kang1, Yutaka Ohkoshi1, Yasuo Gotoh1, Masanobu Nagura1, Isao Wataoka3, Hiroshi Urakawa3	1 Faculty of Textile Science and Technology, Shinshu University 2 Collaborative Innovation Center for Nanotech FIBER (nanoFIC), Shinshu University 3 Faculty of Engineering and Design, Kyoto Institute of Technology
Metal-Complex Impregnation on Woven Fabrics by Supercritical Carbon Dioxide	G5-P-16	Ⅱ	A. Ehrhardt1 and S. Okubayashi2	1Center for Fibers and Textile Science, Kyoto Institute of Technology 2 Advanced Fibro-Science, Graduate School of Science and Technology, Kyoto Institute of Technology
Metallization of High Strength Fibers using Metal Iodide	G1-P-47	Ⅱ	T. Ishikawa, R. Mochiduki, and Y. Gotoh	Faculty of Textile Science and Technology , Shinshu University
Micelle Formation Behavior of Gemini Surfactants Having Phtalate Ester Isomers as Spacer Chain	G1-P-28	Ⅰ	Y. Toishi, Y. Hirata, T. Sato, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Micro 3D Culture System using Hyaluronan-Collagen Based Capsule for Skeletal Muscle-Derived Stem Cells	S1-P-25	Ⅰ, Ⅱ	Kayoko Tono1,2, Yoshinori Okada2, Maki Masuda2, Akira Akatsuka2, Akira Teramoto1, Tetsuro Tamaki2,   Koji Abe1	1 Department of Bioscience and Textile Technology, Interdisciplinary Graduate School of Science and Technology, Shinshu University 2 Muscle Physiology and Cell Biology Unit, Tokai University School of Medicine
Micro-bubbles from crazed porous polymer film	G5-P-12	Ⅰ	N. Hisada, K. Murase, T. Yokoi, A. Takeno and M. Miwa	Dept. of Materials Science and Technology, Faculty of Engineering, Gifu University
Modeling and Simulation of the Air Drawing of Polymers in the Melt Blowing and Spunbonding Nonwoven Processes	SJ-O-10	14:00	Ting Chen	College of Textile and Clothing Engineering, Soochow University
Modification of Wool Fabric by Atmospheric Pressure Plasma Treatment	G3-O-13	14:20	Masukuni Mori1, Volkmar Von Arnim2 and Albrecht Dinkelmann2	1Mori Consultant Engineering office 2Institute of Textile Technology and Process Engineering
Modification of Wool Fabrics With Anhydrides for Chitosan Grafting	G3-P-46	Ⅲ	Marzieh Ranjbarn 1,2, Mokhtar Arami 1,2, Hajir Bahrami1and Firoozmehr Mazaheri1	1Textile Engineering Department, Amirkabir University of Technology 2Department of Environmental Research, Institute for Colorants, Paint and Coatings
Molecular Arrangement and Surface Morphology of Organized Molecular Films for Aromatic Polyamides Containing Alkyl Groups as the Side-chains	G1-P-09	Ⅲ	Natsuki Sato1, Satoshi Chiba1, Yoko Abe2, Yuji Shibasaki2 and Atsuhiro Fujimori1	1Dept. of Polymer Science and Engineering, Graduate School of Scicience and Engineering, Yamagata University 2Department of Applied Chemistry, Graduate School of Scicience and Engineering, Iwate University
Morphological Change of Electrospun Poly(vinyl pyrrolidone) (PVP) Fibers : Effect of Various Solvents	S3-P-15	Ⅲ	N. Yuya 1, K.W. Kim1, K.H. Lee2, B.S. Kim1 and I.S. Kim1,2	1Faculty of Textile Science & Technology, Shinshu University 2Innovation Center for Nanotech Fibers, Faculty of Textile Science & Technology
Morphological Studies of Self-curled Polyaniline Nanostructure Originated from the Aniline Oligomers	S3-P-17	Ⅱ	Jun Kyu Park, Sang Soo Jeon and Seung Soon Im	Dept. of Fiber & Polymer Engineering, Hanyang University
Morphology and Properties of Conductive Nanoparticle-based Electrospun Nanofibers	S3-O-10	15:00	R. Nakagawa, Y. Ono and M. Kotoko	Dept. of Advanced Fibro-science, Kyoto Institute of Technology
Morphology and Structure of Single-walled Carbon Nanotube Bundles, Single Crystals and Composite Fibers	SJ-O-07	11:20	Tetsuya Uchida	Graduate School of Natural Science and Technology, Okayama University
Morphology Development of Polyethylene by Drawing under Supercritical Carbon Dioxide	G1-P-29	Ⅱ	Masashi Kikuchi and Hiromu Saito	Dept. of Organic and Polymer Materials Chemistry, Tokyo University of Agriculture and Technology
Mulberry and Non-Mulberry silk fibres and particles as sorbents for binding transition and heavy metal ions	G5-O-03	9:40	R.Rajkhowa1, R. Naik2, L. Wang3, S.Smith2, X. Wang1	1Centre for Material and Fibre Innovation, Deakin University 2Center for Antimatter Matter Studies, ANSTO 3School of Fashion and Textiles, RMIT University
Multi- Functional Properties of the Cotton Fabrics Treated with UV-absorbers/Nano silver/DMDHEU	G7-P-26	Ⅱ	M. Kang1 and Y. Kwon2	1Dept. of Clothing and Textiles, Graduate School of SillaUniversity 2 Div. of Fashion Industry, Silla University
Multi-scale Fiber Bioengineering	S8-KO-05	13:40	Yi Li	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
N,N-Disubstituted Aminoheterocycles as Versatile Building Blocks for Organic Dyes and Functional Materials	S4-KO-03	15:00	Horst Hartmann	Institut fur Angewante Photophysik, Technische Universitat Dresden
Nanofiber Technologies and Developing Markets	S3-KO-03	10:40	Jong-Chul Park	CEO, Finetex EnE, Inc.
Nanostructured Fibre Sizings For Multifunctional Effects On Fibres And Composites	S4-KO-08	9:40	E. Mäder, J. Rausch, R.-C. Zhuang, S.-L. Gao, R. Plonka	Leibniz Institute of Polymer Research Dresden
New functional silk materials	S1-KO-04	16:00	Franz Effenberger	Institute for Textile Chemistry and Chemical Fibers, ITCF Denkendorf
New Indeces for Drape Shape Specification	G2-P-25	Ⅲ	S. Kato1 and C. Mizutani2	1Graduate Schoool of Textile and Clothing Science, Otsuma Women's University 2Dept. of Clothing and Textile, Otsuma Women's University
NO/CO Reduction on Nanofibrous Filter Media Containing Noble Metals Doped on Alumina Nanofibers	S3-O-14	16:40	Soo-Jin Park1,2, S. Bhargava2, George G. Chase2, and Hak Yong Kim1	1Center for Healthcare Technology & Development and Dept. of Organic Materials and Fiber Engineering, Chonbuk National University 2Dept. of Chemical and Biomolecular Engineering, The University of Akron
Nondestructive Method for Identification of 3D Structure of Hand-made Carpet	G4-P-24	Ⅱ	M.J. Karamad1, D. Vavrik2, J. Dammer2, M. Latifi3 and M. Amani-Tehran3	1Art Department, Shahid Bahonar University 2Institute of Eexperimental and Applied Physics – Czech Technical University 3Textile Engineering Department, Textile Research & Excellence Centers, Amirkabir University of Technology
Novel Polymers with Anti-HS(Hofmeister Series) Properties	S4-P-15	Ⅰ	J. Wang1,2 and M. Satoh1	1Dept. of Chemistry & Materials Science, Tokyo Institute of Technology 2School of Materials Science & Engineering, Beijing Institute of Technology
Objective Grading Method of Low Level Fabric Wrinkle generated after Laundry	G7-O-12	16:20	Eun Ho Shin1, Moon Hwo Seo2, Jae Won Chang3, Sog Kie Hong3	1Korea Apparel Testing and Research Institute 2Dept. of Textile Engineering Konkuk University 3 LG Electronics Inc.
Olive Oil as a Natural Phase-Change-Material for the Use in Subzero Temperature Condition	G5-P-33	Ⅰ	Elham Fallahi1, Mohammad Barmar1, Mohammad Haghighat Kish2	1Department of Polyurethane, Fibers, and Nanopolymers, Iran Polymer and Petrochemical Institute 2Textile Engineering Department, Amirkabir University of Technology
Opening Speech		13:35	M.Shimosaka	Faculty of Textile Science and Technology, Shinshu University
Optimal Cultivating Conditions for Extraction of Dye-colorant from Fungi Fermentation	G3-P-50	Ⅰ	H. S. Kim1, J. H. Choi2 and Y. M. Park3	1Knit Design, Korea Textile & Fashion Polytechnic college 2 Dept. of Horticulture, Graduate School of Horiculture, Yeongnam University 3Research Institute of Clothing & Textile Sciences, Yonsei University
Optimal Design of Coat Hanger Die Based on Multi-membered Evolution Strategy	G1-O-08	15:20	Kai Meng1,2, Xinhou Wang1,2 and Xiubao Huang1	1College of Textiles, Donghua University 2Key Laboratory of Science & Technology of Eco-Textile, Ministry of Education
Optimal Filling Density of Down Jacket	G2-P-15	Ⅱ	T. Li, R. Wang and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Optimisation of Silver Plating Process for Polyester Fabric	G3-O-10	11:40	C.W.M. Yuen, S.Q. Jiang, C.W. Kan, S.K.A. Ku, P.S.R. Choi, K.P. Tang and S.Y. Cheng	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Optimum Time Series Fractal Features for Inspection of Woven Fabric Flaws	G2-O-14	15:20	H.G. Bu1, J. Wang2 , C.T. Tian1 and X.B. Huang1	1College of Textiles, Donghua University 2Key Laboratory of Textile Science and Technology of Ministry of Education of China
Organic/inorganic biocomposite : Biomineralization of Hydroxyapatite on to Silk Nanofiber for Bone Tissue Engineering	S3-P-08	Ⅱ	M.J. Lee1, C.S. Ki1, H.Y. Kwon2, K.G. Lee2 and Y.H. Park1	1Dept. of Biosystems & Materials Science and Engineering, Seoul National University 2Dept. of Sericulture and Entomology, National Institute of Agriculture and Technology, RDA
Orientation Analysis on the Initial Fiber Structure of Polyester Fibers by in-situ X-ray Measurement with less than 1ms Time-resolution	G1-O-06	14:40	KyoungHou Kim1, Ryo Aida2, YoungAh Kang2, Yutaka Ohkoshi2, Yasuo Gotoh2, Masanobu Nagura2, Isao Wataoka3 and Hiroshi Urakawa3	1Collaborative Innovation Center for Nanotech FIBER (nanoFIC), Shinshu University 2Faculty of Textile Science and Technology, Shinshu University 3Faculty of Engineering and Design, Kyoto Institute of Technology
Orientational and Liquid Crystalline Properties of Ionized Azobenzne Materials	G5-P-25	Ⅱ	Jinzhi Wu, Masanori Nata and Seiji Ujiie	Department of Applied Chemistry, Faculty of Engineering, Oita University
Oriented Noncrystalline Phase in PET Fibers: DSC and DMA Correlation	G1-O-07	15:00	M. Karimi and Z. A. Kazemzade	Dept. of Textile Engineering, Amirkabir University of Technology
Outlast Textile Fabric Development and Function Test	G5-P-05	Ⅲ	Chen Guofen,  Yang Lefang	Zhejiang Textile and Fashion College
Parallel Layer Orientation and its Instability in Side-Chain Polymer Smectic Liquid Crystal under Shear Flow	G1-O-27	15:20	M. Tokita, G. Sugiyama, S. Masuyama, T. Ishii, S. Kang and J. Watanabe	Department of Organic and Polymeric Materials, Tokyo Institute of Technology
Photocatalyst nanofibers obtained from organic-inorganic hybrids	SJ-O-11	14:20	Koji Nakane	Graduate School of Engineering, University of Fukui
Photochemical Applications in Textile Processing	S4-KO-09	10:40	Akihiko Ouchi	Senior Research Scientist, Renewable Plastics Group, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology
Photochromic Textiles	S1-KO-01	13:40	Masuhiro Tsukada	Faculty of Textile Science and Technology, Shinshu University
Photochromism and Reversible Orientational Transition in Langmuir-Blodgett Films of Amphiphilic Liquid Crystalline Azo-Polymers	G5-P-15	Ⅰ	T. Yoshimi, M. Moriyama and S. Ujiie	Department of Applied Chemistry, Faculty of Engineering, Oita University
Photodegradation of Linen Fibers Dyed with Natural Dyes and Mordants	G3-P-05	Ⅰ	M. Kanei1 and N. Kohara2	1Dept. of Environmental Design, Showa Women's University 2Dept. of Human Life Science and Culture, Graduate School of Human Life Sciences, Showa Women's University
Photon Trapping and the Enhancement of Electronic Excitation Energy Transfer Efficiency Caused by Colloidal Crystals	G5-P-23	Ⅲ	A. Tsuchida1, Y. Ohi, S. Takahashi1, H. Kimura1 and T. Okubo2	1 Department of Applied Chemistry, Faculty of Engineering, Gifu University 2 Institute for Colloidal Organization
Physical Properties and Manufacturing Process Evaluation of Charcoal Nylon/Stainless Steel Complex Yarn and Knitted Fabrics	G2-O-24	10:00	Chin-Mei Lin1, Shu-Hua Hsiao1, Ching-Hui Lin2 and R. S. Yao3	1Graduate Institute of Fashion Design, Ling Tung University 2Department of Fashion Design, Ling Tung University 3Taiwan Textile Research Institute
Physical properties evaluation of fiber reinforcement dental filling material	G4-O-11	14:20	Po Ching Lu1, Chih Hung He1, Chao-Tsang Lu2, Ching Wen Lou3 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Institute of Life Sciences, Central Taiwan University of Science and Technology 3Institute of Biomedical Engineering and Material Science / Center of General Education, Central Taiwan University of Science and Technology
Physical Properties of the Stereoblock Poly(lactic acid)s (sb-PLAs) Melt Spun fibers	G6-P-03	Ⅰ	Jae-Chang Lee1, Yoshiharu Kimura2, Hideki Yamane1 and Zhen Tang3	1Center for Fiber & Textile Science, Kyoto Institute of Technology 2Department of Biomolecular Engineering, Kyoto Institute of Technology 3Musashino Chemical Laboratory. LTD.
Physiochemical Properties and Dyeability of Microbial Colorants	G3-P-49	Ⅲ	Y.S. Kim and J.M. Choi	Dept. of Fashion Design Information, College of Human Ecology, Chungbuk National University
PLA/ Tencel nonwoven dressing Processing and physical properties evaluation	G4-P-19	Ⅲ	Chieh Yu Chao1, Ching Wen Lou2, Hsing-Wen Sung3, and Jia Horng Lin1,4	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2 Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 3Department of Chemical Engineering, National Tsing Hua University 4Graduate Institute of Chinese Medical Science, China Madical University
Plasma-based surface amination of polymers at atmospheric pressure	S4-KO-05	16:40	C.-P. Klages1,2, A. Hinze2, and M. Thomas1	1Fraunhofer Institute for Surface Engineering and Thin Films IST 2Institut für Oberflächentechnik IOT, Technische Universität Braunschweig
Polarized FT-IR Study on Aligned Nylon-6 Nanofibers Induced by the Gap Effect	S3-P-14	Ⅱ	N. Kimura, K.H. Lee, K.W. Kim, B.S. Kim and I.S. Kim	Department of Functional Machinery and Mechanics, Faculty of Textile Science and Technology, Shinshu University
Poly(2,5-benzimidazole) Nanofibers prepared by Reaction-induced Crystyallization	G1-P-41	Ⅱ	K. Kimura1, J. Gong1, S. Kohama1, S. Yamazaki1, T. Uchida2 and K. Kimura1	Graduate School of Environmental Science, Okayama University
Poly(L-lactic acid)/Bacterial Cellulose Composites Produced Under the Cultivation of Acetobacter	G6-P-06	Ⅰ	F. Moriyama1, N. Kanno2, S. Suzukli3 and C. Sawatari1	1Graduate School of Education, Shizuoka University 2Industrial Research Institute of Shizuoka Prefecture 3Hamamatsu Technical Support Center
Polyallylamine Based Water-Repellent Oligomer Having Hydrophilic Segments	S4-P-16	Ⅱ	T. Kawase, T. Okada and T. Oida	Dept. of Chemistry & Materials Technology, Graduate School of Science and Technology, Kyoto Institute of Technology
Polyaniline/Multiwall carbonnanotube composite	G5-O-12	14:40	Seong Hun KIM1, Duk Ki KIM1,  Kyung Wha OH2	1Hanyang University 2Chung-Ang University
Polyelectrolyte-Filled Multilayer Microcapsules: Assembly and Mechanical Properties	S1-P-05	Ⅰ, Ⅱ	B. S. Kim1, O. I. Vinogradova2, K. W. Kim1 and I. S. Kim1	1 Faculty of Textile Science & Technology, Shinshu University 2 Laboratory of Physical Chemistry of Modified Surfaces, Russian Academy of Sciences
Polymer Brush/Inorganic Particle Hybrids: From Precise Designing to Applications	SJ-O-17	16:40	Kohji Ohno	Institute for Chemical Research, Kyoto University
Polymer Crystallization under Flows Studied by Quantum Beam	G1-O-28	15:40	T. Kanaya1, G. Matsuba1,2 and K. Nishida1	1Institute for Chemical Research, Kyoto University 2Dept. of Polymer Science & Enginnering, Graduate School of Sciecne and Engineering, Yamagata University
Polymer Nano-adhesion Promoted by Chain Interdiffusion	G1-P-10	Ⅰ	I. Narayama1, K. Akabori1, H. Morita2, T. Nagamura1 and K. Tanaka1	1Dept. of Applied Chemistry, Kyushu University 2National Institute of Advanced Industrial Science and Technology
Polymer/Carbon Nanotube Composite Films and Fibers	S2-KO-01	9:00	Marilyn L. Minus1, Han Gi Chae1, Jong-Beom Baek2, Rahul Jain1, Dhriti Nepal1, Young Ho Choi1, Yaodong Liu1, Sudhakar Jagannathan1 and Satish Kumar1	1School of Polymer, Textile and Fiber Engineering, Georgia Institute of Technology, GA 2School of Nano-Bio, Chemical Engineering, Ulsan National Insitute of Science and Technology
Polypropylene (PP) Fiber Reinforced with High Density Polyethylene (HDPE) Bottle Waste	G1-P-35	Ⅱ	Akkachai Lousakshai1, Ittiporn Suwannamek2 and Natee Srisawat1,3	1Synthetic Fiber Workshop, Department of Textile Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi, 2National Metal and Material Technology Center 3Textile-Collaborative Research Consortium, Thailand's National Science and Technology Development Agency
Polypropylene/Vapor Grown Carbon Fiber Composites Prepared by Melt Compounding and Their Applications	G1-O-18	10:40	S. Tanoue1, T. Koyama2, N. Horisawa1, T. Yamamoto2 and Y. Iemoto1	1Fiber Amenity Engineering, Graduate School of Engineering, University of Fukui 2Materials Science and Engineering, Graduate School of Engineering, University of Fukui
Polyurethane Foam Combined with pH-sensitive Alginate/Bentonite for Wound Dressing	G5-P-09	Ⅰ	J. S Park, S.T Oh	Department of Biosystems & Biomaterial Science and Engineering, Seoul National University
Polyurethane Web Fabricated by Laser-Electrospinning	S3-P-21	Ⅲ	M. Takasaki1, K. Sugihara2, K. Hara2, S. Kinugawa2, K. Morie2, Y. Ohkoshi2, T. Hirai2, T. Fujii3, H. Shimizu3 and M. Saito3	1Faculty of Textile Science of Technology, Shinshu University 2Satellite Venture Business Laboratory, Shinshu University 3KB SEIREN, LTD.
Pore Size Control of Stretched PTFE Tube Used for Small-diameter Vascular Graft	G1-O-12	17:00	WANG Fujun1,2, LI Zhuo2, ZHENG Kexi2, LUO Zhenxin2, and WANG Lu1,2	1Key Lab of Textile Science and Technology, Ministry of Education 2College of Textiles, Donghua University
Porous Structure and Adsorption Capability of Four Cellulose Fibers	G1-P-21	Ⅲ	L. Guo and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Predicting Body Parameters from the Date of Small Sample Size	G7-P-03	Ⅲ	Z. Huang1, H. Liu2 and H. Zhang2	1The Institute of Art and Clothing, Tianjin Polytechnic University 2The Institute of Textiles, Tianjin Polytechnic University
Predicting Fabric Draping with Respect to Thickness and Density	G2-P-24	Ⅱ	X.Wang, Y.Zhang and H.Liu	The Institute of Textiles, Tianjin Polytechnic University
Preference and Subjective Hands of Washed Fabric in Dry State with Detergent for Drum Type Washer	G7-P-15	Ⅲ	Eui Kyung Roh1 and Hyo-Seon Ryu2	1Dept. of Clothing & Textiles, Yonsei University 2Dept. of Clothing & Textiles, Seoul National University
Preparation and application of cationic perfluoroalkyl water and oil repellent finishing agent	G3-P-21	Ⅱ	Zhu Hong-min1, Fu Shao-hai2, Zhang Ming-jun2 and Sun Ren-bin2	1Zhejiang Jiaxing entry-exit inspection and quarantine bureau 2Key laboratory for Eco-textile of Ministry of Education ,Jiangnan University
Preparation and application of waterborne phosphorus-containing organoboron multi-functional flame retardant agent	G3-P-30	Ⅱ	Xiangdong Zhou, Jinghong Tao and Runzhi Cai	College of Textile and Clothing Engineering, Soochow University
Preparation and Characterization of Conductive Poly(o-anisidine) / Kaolinite Composite Materials	G1-P-12	Ⅲ	M. Karakışla1, S. Çetinkaya2 and M. Saçak1	1Department of Chemistry, Faculty of Science, Ankara University 2Cumhuriyet University, Department of Chemical Engineering
Preparation and Characterization of Crosslinkable polymers based on Sulfonated poly(ether sulfone) and m-phenylene isophthalamide segments	G1-P-02	Ⅱ	Hyun Jin Jung and Chang Gi Cho	Center for Advanced Functional Polymers, Department of Fiber & Polymer Engineering, Hanyang University
Preparation and Characterization of Polyketone(PK) Fibrous Membrane via Electrospinning	S3-P-11	Ⅱ	O.Ohsawa1, K.H. Lee,2 B.S. Kim3, K.W. Kim3, S.K.Yoon4 and I.S. Kim3	1Graduate School of Science and Engineering, Shinshu University 2Innovation Center for Nanotech Fibers, Faculty of Textile Science & Technology 3Faculty of Textile Science & Technology, Shinshu University 4Hyosung Corporation
Preparation and Characterization of Sericin/Silica Composite using Ethanol -precipitated sericin	G1-P-16	Ⅰ	H. Oh, M. K. Kim and K. H. Lee	Dept. of Biosystems and Biomaterials Engineering, College of Agriculture and Life Sciences, Seoul National University
Preparation and Crystallization behavior of Poly (butylenes succinate) (PBS) / TS-1 Zeolite Nanocomposites	G1-P-19	Ⅰ	Gi-Ho Hwang, Sung-Yeon Hwang and Seung-Soon Im	Dep.t of Fiber & Polymer engineering, College of Engineering, Hanyang University
Preparation and Evaluation of Enzyme Entrapped in Silica-Chitosan Hybrid Bead for Enzymatic Hydrolysis of Sericin	G5-P-29	Ⅲ	M. K. Kim, H. Oh and K. H. Lee	Dept. of Biosystems & Biomaterials Science and Engineering, College of Agriculture and Life Sciences, Seoul National University
Preparation and Mechanical Properties of Kenaf/Starch Bio-Composites	G6-P-12	Ⅰ	Dae Sung Kim and Kyung Hun Song	Dept. of Clothing & Textiles, PaiChai University
Preparation and Microstructure of Electrospun Regenerated Silk/CNTs Nanofibers	S1-P-10	Ⅰ, Ⅲ	Kai Wei1, Jian-hua Xia1, Byoung-Suhk Kim1, Ick-Soo Kim1	1Graduate School, Interdisciplinary Division of Science and Technology, Shinshu University
Preparation and Propereties of PP/Aliphatic Copolyester Blends with Enhanced Dyeability	G1-P-32	Ⅱ	Myong Jo Ham1, Young Ho Kim1 and Seung Min Nam2	1Department of Organic Materials and Fiber Engineering, Soongsil University 2FY R&D Team, R&D Center, HUVIS
Preparation and Shielding Property of Vapor Grown Carbon Nanofibers / Epoxy Composites	S1-P-06	Ⅰ, Ⅲ	Xu-Dong Jin1, Qing-Qing Ni2 and Toshiaki Natsuki2	1 Interdisciplinary Graduate School of Science and Technology, Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University
Preparation and Thermal Properties of Liquid Crystalline Ionic Complexes	G5-P-24	Ⅰ	A. Kamahori, Y. Masuda and S. Ujiie	Department of Applied Chemistry, Faculty of Engineering, Oita University
Preparation Conductive Polypyrrole / Poly(ethylene terephthalate) Composite Fibers and Investigation of Some Properties	G1-P-11	Ⅱ	Z. Aydın1, M. Karakışla1, E. Erdem2 and M. Saçak1	1Department of Chemistry, Faculty of Science, Ankara University 2Department of Chemistry, Faculty of Education, Hacettepe University
Preparation of Anatase TiO₂/PDMS Nanofibers by Electrospining	S3-P-22	Ⅰ	Hae Jin Jang, Tae Sang Lee, Fang Fang Yuan, Gang Li, and Seung Goo Lee*	BK21 FTIT, Dept. of Organic Materials & Textile System Engineering, Chungnam National University
Preparation of Bonding Structured Electrospun Polystyrene Fibrous Mats by Adding Adhesive	S3-P-19	Ⅰ	Dae-Kwang Park, Soo-Jin Park, and Hak Yong Kim	Center for Healthcare Technology & Development and Department of Organic Materials and Fiber Engineering,  Chonbuk National University
Preparation of Cationic Polyrotaxanes via Deprotection of Polyrotaxane-Amino Acid Conjugates with Controlled Degree of Substitution	G5-P-28	Ⅱ	Keisuke Kagaya1, Kousaku OHKAWA2, and Jun ARAKI3	1Faculty of Textile Science and Technology, Shinshu University 2Institute of High Polymer Research, Faculty of Textile Science and Technology, Shinshu University 3International Young Researchers Empowerment Center, Shinshu University
Preparation of conductive textile fibres by melt spinning and coating methods by utilising carbon nanotubes and conjugated polymers.	S8-KO-01	9:00	Mikael Skrifvars	Polymer technology, School of Engineering, The University of Borås
Preparation of Copper-plated Conductive Fibers Using Supercritical Carbon Dioxide and Their Characterization	S4-P-19	Ⅱ	T. Hori1, I. Tabata2, K. Hisada1 and H. J. Cho1	1Graduate School of Engineering, University of Fukui 2Techunical Department, University of Fukui
Preparation of High Refractive and Transparent Hybrid Films by Incorporation of TiO2 Nano-particles into PMMA	G5-P-32	Ⅲ	K. Yoshinaga and S. Yamada	Dept. of Appl. Chem., Faculty of Engineering, Kyushu Institute of Technology
Preparation of Poly(L-lactic acid) microcapsule of rosewater for fragrant fabrics	G6-P-05	Ⅲ	M. Kalantari1 , M. Haghighat Kish1 , S. Akbari2 ,and H. Bahrami1	1Textile Engineering Dept. Amirkabir Univ of Technology 2Textile Technology Research Group, Amirkabir University Branch, Iranian Academic Center for Education, Culture and Research (ACECR)
Preparation of Poly(p-phenylene pyromelliteimide) Needle-like Crystal	G1-O-25	14:40	K. Wakabayashi1, T. Uchida2, S. Yamazaki1 and K. Kimura1	1 Graduate School of Environmental Science, Okayama University 2 Graduate School of Natural Science and Technology, Okayama University
Preparation, Structure and Mechanical Properties of Regenerated Cellulose Fibre from Bagasse	S1-P-26	Ⅰ, Ⅲ	Atsushi Yamamoto, Ahmed Jalal Uddin, Yasuo Gotoh, Masanobu Nagura	Faculty of Textile Science and Technology, Shinshu University
Process Technique and Property Evaluation of Sound Absorption/Fire retarded Compound Board	G5-O-08	11:40	C. W. Lou1, P. Chen2, and J. H. Lin2	1Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University
Process, Structure and Properties of Four-component Filament / staple Fiber Core-spun Yarn	G2-P-05	Ⅰ	Yuan Xue	College of Garment & Art Design, Jiaxing University
Processing and Physical Properties Evaluation of Polyvinyl Alcohol and Bletilla Striata Dressing via Electrospinning	S3-O-13	16:20	C.T. Hsieh1, C.Y. Chao2, C.W. Low3, C.T. Lu4 and J.H. Lin2	1Laboratory of Fiber Application and Manufacturing, Dept. of Fiber and Composite Materials, Feng Chia University 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 3Center for General Education / Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 4Institute of Life Sciences, Central Taiwan University of Science and Technology
Processing Method for Wet-laid Carbon Fibrous Web Reinforced Unsaturated Polyester Composite	G4-P-08	Ⅰ	Z. Li and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Processing technique and characteristics evaluation of preparation Chitosans/Hyaluronic acid/Sodium alginate composite dressing	G4-O-15	15:40	Song Lien Wu1, Ching Wen Lou1 and Jia Horng Lin2,3	1Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 3 Graduate Institute of Chinese Medical Science, China Madical University, Taichung, Taiwan, R.O.C.
Processing Technique of Sound Absorption Composite Fabrics for the PET Nonwoven Preparation	G2-O-33	15:00	You Cheng Liao1, Chia Chang Lin2, Ching Wen Lou3 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Taiwan Police College 3Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
Properties of PLA Fiber Treated by Supercritical Carbon Dioxide	G6-P-04	Ⅱ	X. Shen, W. Yang, Z. Zhang and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Properties of Sheet with Functionally Gradient Structure by using Papermaking Technique	G6-O-03	9:40	Huajun XU, T.KIMURA and H.INO	Division of Advanced Fibro-science, Kyoto Institute of Technology
Property-Structure Relationships in Advanced Synthetic Fibres	S2-KO-04	10:40	A.R.Bunsell	Materials Centre, Mines ParisTech, (formerly Ecole des Mines de Paris)
Protective fiber composites reinforced by shear thickening fluid	G4-P-18	Ⅱ	Book Sung Kim1, Ji Hyun Sim1, Jong Gyu Paik2, Byung Il Yoon2 and Seung goo Lee1	1BK21 FTIT, Dept. of Organic Materials & Textile System Engineering, Chungnam National university 2Agency for Defense Development
Proton Conductivity of Composite Membrane containing Sulfonated Polyimide Nanofibers	S3-O-04	11:20	H. Kawakami and T. Tamura	Dept. of Applied Chemistry, Tokyo Metropolitan University
Quality Analysis of Men's Wear based on A General Garment Quality Evaluation System	G7-P-02	Ⅱ	Z. Huang1, H. Liu2 and L. Zhang3	1The Institute of Art and Clothing, Tianjin Polytechnic University 2The Institute of Textiles, Tianjin Polytechnic University 3The Institute of Textile and Clothing, Southwest University
Quantitative evaluation of 3D breast velocity during activities	G7-O-10	15:20	Jie Zhou, Winnie Yu and Sun-pui Ng	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Reactive dyeing properties of dyeable polyurethanes	G3-P-10	Ⅲ	Dongbin Kim, Ieeseok Jeong and Joonseok Koh	Dept. of Textile Engineering, Konkuk University
Recent Developments in Intelligent Textiles -An Emerging Transformative Technology	PL-02	15:00	Xiao-Ming Tao	Hong Kong Polytech, Hong Kong
Reduction of Moisture Sensitivity by Acetylation to Improvement Interface Adhesion between Bamboo Strips and Vinyl Ester Resin	G4-P-10	Ⅲ	H. Y. Chen1,2,3, X. Ding1,3, M. H. Miao2 and Y. K. Luo1,3	1Key Lab of Textile Science & Technology, Ministry of Education, Donghua University 2CSIRO Materials Science & Engineering 3College of Textiles, Donghua University
Reproducibility of silk fabric for overseas luxury brand apparel in Japan	G2-P-09	Ⅱ	M.Kakuta1, M.Takatera2 and T.Ohtani2	1Division of Science and Technology, Graduate School of Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University
Research of Conveyer belt fabric surface Humidity Temperature and Moisture content pre-treatment by Far-infrared Heater	G2-O-18	17:00	C.C. Chuang, C.C. Hsu and W.H. Hsing	Department of Textile Engineering, Chinese Culture University
Research on Consumer motivation for Luxury Products in China	G8-P-01	Ⅰ	Zhe Zheng 1,2 and Chen Yan1	1School of Textile and Fashion Engineering, Soochow University 2College of Fashion, Zhejiang Sci-Tech University
Research on Realization of the Hand Spinning Skill by Using Robot Manipulator	S1-P-18	Ⅰ, Ⅲ	Ch. Purev-Ulzii, T. Kawamura, J. Yoshida	Department of Functional Machinery and Mechanics, Faculty of Textile Science and Technology, Shinshu university
Research on the Properties of PTT/PET Composite Filament	G1-P-33	Ⅲ	Yan Cao	Library, Jiaxing University
Sc-CO2/Post-Thermal Treatment: Their Effective Role for Aramid Fiber Metallization and Coating Adhesion Improvement	G3-P-19	Ⅲ	N. Martinez1, K. Hisada2, I. Tabata3, S. Yonezawa4 and T. Hori2	1Headquarters for Innovative Society-Academia Cooperation, University of Fukui 2Fiber Amenity Engineering Course, Graduate School of Engineering, University of Fukui 3Technical Dept., University of Fukui, 4Dept. of Materials Science and Engineering, Faculty of Engineering, University of Fukui
Screen Printing of Natural Lac and Marigold Dyes on Cotton and Silk Fabrics	G3-O-07	11:20	M. Nakpathom, B. Somboon and N. Narumol	National Metal and Materials Technology Center, National Science and Technology Development Agency
Semi-finished Textile Structures for Technical Textile Application	G4-P-23	Ⅰ	Dr.Hireni Mankodi	Dept. of Textile Engineering, Faculty of Tech and Engg., M.S.University of Baroda
Sensitizers for Zinc Oxide Dye-sensitized Solar Cell	G5-P-22	Ⅱ	M. Matsui1, Y. Kubota2, K. Funabiki1, T. Yoshida2 and H. Miura3	1 Faculty of Engineering, Gifu University 2 Graduate School of Gifu University 3 Chemicrea Co., Ltd
Simulation on Carding Quantity with Carding Wire	G2-O-10	14:00	J.W. Yao1, Y.H.Liou2 and W.H. Hsing1	1Department of Textile Engineering, Chinese Culture University 2Institute of Materials Science and Nanotechnology
SmI2-Promoted Reformatsky-Type Reaction of Alkyl 1-Chlorocyclopropanecarboxylates	S1-P-15	Ⅰ, Ⅱ	E. Yoshida, T. Nagano, Y. Nishii and J. Motoyoshiya	International Fiber Engineering Course, Graduate School of Shinshu University
Solid particle erosion behavior of polymer composites filled with VGCF and CB	G4-P-13	Ⅲ	Danna QIAN 1, Limin BAO 2,Guoyu Wang 3 and Masayuki TAKATERA 2	1 Department of Bioscience and Textile Technology, Interdisciplinary,  Graduate School of Science and Technology Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University 3 School of Textiles , Tianjin Polytechnic University
Solo Bobbin Tracing System for Spinning Frame Based on Label Technology	S1-P-02	Ⅰ, Ⅲ	J.H. Liu1, Z. Gong1, H.J. Hu1, Hongxia Jiang2	1Creative Digital Media Research Center, School of Textile and Garment, Jiangnan University 2Faculty of Textile Science and Technology, Shinshu University
Some Protective clothings for Agriculture	G3-P-32	Ⅰ	Dr. Ashutosh Mairal1, Dr. Anjali Karolia2 and Ms. Rajni Yadav2	1Department of Textile Chemistry, Faculty of Technology and Engineering. The Maharaja Sayajirao University of Baroda 2Department of Clothing and Textile, Faculty of Family and Community Sciences, The Maharaja Sayajirao University of Baroda
Sound Characteristics of Fabrics According to Frictional Conditions	G2-O-12	14:40	Y. Yang and G. Cho	Dept. of Clothing and Textiles, Yonsei University
Spider-net Like Structured Nanofibers and Their Applications	S3-KO-02	9:40	Hak-Yong Kim1, Soo Jin Park1, Daman Chandra Parajuli2 and Nasser A.M. Barakat1	1Dept. of Organic Materials & Fiber Engineering, Chonbuk National University 2Dept. of Bionanosystem Engineering, Chonbuk National University
Stable expression of spider flagelliform silk protein in Bombyx mori cell line by a piggyBac transposon-derived vector	G6-P-07	Ⅱ	Yuansong Zhang1,2, Tianfu Zhao2, Aichun Zhao2, Junhua Hu2 , Dayang Wu1, Kunihiro Shiomi2, Zenta Kajiura2 and Masao Nakagaki2	1College of Textiles and Garments, Southwest University 2Dept. of Applied Biology, Faculty of Textile Sciences and Technology, Shinshu University 3The Key Sericultural Laboratory of Agriculture Ministry, Southwest University
Stain Prevention of Cationized Cotton Printed with Reactive Dyes	G3-O-05	10:40	M.A. Ranjbar, R.M.A. Malek and F. Mazaheri	Dept. of Textile Engineering, Amir Kabir University of Technology
Strategy of KAIHARA for Global Marketing	PL-01	13:30	Yoshiharu Kaihara	Kaihara Corporation, Japan
Stress Relaxation of Worsted Fabrics: A Unique Approach	G2-O-23	9:40	Emadaldin Hezavehi1, Saeed Shaikhzadeh Najar2 and Peyman Zolgharnein1	1Dep.t  of Textile Engineering, Arak Islamic Azad University 2Dep.t of Textile Engineering, Amirkabir University of Technology
Structural and Mechanical Properties of Polypropylene / Organomontmorilonite Nanocomposite Filaments	G1-O-17	10:00	M. Validi, S. Bazgir and A. Rashidi	Faculty of Technical and Engineerineg, Science and Research Branch, Islamic Azad University
Structural Formation of Polyethylene Blends during Drawing	SJ-O-09	13:40	Go Matsuba	Department of Polymer Science and Technology, Yamagata University
Structural Optimization of Woven Fabric with Curved Surface	G2-P-14	Ⅰ	Y. Wang, X. Gou and H. Liu	The Institute of Textiles, Tianjin Polytechnic University
Structural parameters for prediction of yarn packing density and strength	G2-O-08	11:40	D. Křemenáková1 and J. Militký2	1Dept. of Textile Technologies, Textile Faculty, Technical University of Liberec 2Dept. of Textile Materials, Textile Faculty, Technical University of Liberec
Structural Study on Aromatic Poly(amic n-alkyl ester)s and Their Derivatives by Solid-State Imidization	G1-P-01	Ⅰ	Katsuhiro Inomata, Sachi Shimomura, Hiroyasu Hasegawa, Marika Ogiso, Hideki Sugimoto, and Eiji Nakanishi	Department of Materials Science and Engineering, Graduate School of Engineering, Nagoya Institute of Technology
Structure and Electric Properties of Electrospun Conducting Polymer Nanofibers	S3-O-08	14:20	H. Umeda1, K.H. Chan1, T. Yamao2, M. Kotaki1 and S. Hotta2	1Dept. of Advanced Fibro Science, Kyoto Institute of Technology 2Dept. of Macromolecular Sciecne and Engineering, Kyoto Institute of Technology
Structure and Properties of Electrospun poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (PHBV) and  Multi-Walled Carbon Nanotube (MWCNT) Composite Fibers	S3-O-09	14:40	K.H.K. Chan1, S.Y. Wong2, W.C. Tiju2, X. Li2, Y.Z. Zhang3, P.C. Lim2, C.T. Lim3, M.Kotaki and C.B. He2	1Dept. of Advanced Fibro-Science, Kyoto Institute of Technology 2A*STAR (Agency for Science, Technology and Research), Institute of Materials Research and Engineering 3Division of Bioengineering, Faculty of Engineering National University of Singapore
Structure Development of Poly (3-hexylthiophene-2,5-diyl) (P3HT)-Based Blend Nanofibers via Electrospinning	S3-P-25	Ⅰ	Y. Kusakabe1, H. Umeda1, K.H. Chan1, T. Yamao2, M. Kotaki1 and S. Hotta2	1Dept. of Advanced Fibro Science, Kyoto Institute of Technology 2Dept. of Macromolecular Sciecne and Engineering, Kyoto Institute of Technology
Structure of Electrospun Polyester Nanofibers	G4-O-08	11:40	Y. Kawahara1, A. Nakayama1, S. Naruko2 and M. Tsuji3	1Dept. of Biological and Chemical Engineering, Gunma University 2Graduate School of Sciecne and Engineering, Kyoto Institute of Technology 3Institute for Chemical Research, Kyoto University
Studies on Alkali Pretreatment- An Insight of Physical Properties and Structural Changes of Flax Fabric	G3-P-48	Ⅱ	S. D. Bhattacharya	Department of Textile Chemistry, Faculty of Tech. and Engg., The M. S. University of Baroda, Vadodara
Studies on the moisture-sensitive shape memory polymers	G5-P-10	Ⅱ	Shaojun Chen, Jinlian Hu, Chun-wah Yuen and Laikuen Chan	Institute of textiles and clothing, The Hong Kong Polytechnic University
Study of Poly(L-lactic acid) Filaments by Infrared Spectroscopy	G1-P-24	Ⅲ	M. Radjabian1, M. H. Kish1 and N. Mohammadi2	1Dept. of Textile Engineering, Amirkabir University of Technology (Tehran Polytechnic), 2Dept. of Polymer Engineering, Amirkabir University of Technology (Tehran Polytechnic)
Study of Source Location in Thin Plates	S1-P-03	Ⅰ, Ⅱ	Chao Du1, Qing-Qing Ni2 and Toshiaki Natsuki2	1Interdisciplinary Graduate School of Science and Technology, Shinshu University 2Dept. of Functional Machinery and Mechanics, Shinshu University
Study of the Relationship between Residual Dust and Dust Dislodgement Efficiency of Bag Filter — Development of the Accelerative Dust Deposit Equipment —	G4-P-17	Ⅰ	Mingming YU 1, Limin BAO 2 and Kishima Takamasa 3	1Functional Machinery and Mechanics, Graduate School of Science and Technology Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University 3JapanSpindle Corporation
Study of Women's Breast Forms and Brassieres Structures and Pattern Design -Emphasizing on the derivated flat breast forms	G7-P-27	Ⅲ	SHANG Xiao-mei, XU Jing, YU Sheng-bo	Collage of Textile and Clothing Engineering of SooChow University
Study on Development and Properties of the Regenerated Silk Protein Fiber	SJ-O-04	10:00	Bojun Xi	College of Textile Engineering and Dress Designing , Shaoxing University
Study on Environmental Conformity of Chromium-Complex Acid Dye	S4-KO-04	16:00	E. K. Choe, Y. D. Cho and S. H. Son	Korea Institute of Industrial Technology
Study on Influences of Collar Types in Different Clothing Fullness on Womens' T-shirt Fashionable Design Based on Visual Cognition	G7-P-04	Ⅰ	Fang Qin 1,2, Shan-shan1 Wang, Xiao-feng Jiang 1, Guo-lian Liu 1	1 College of Textile and clothing Engineering, Soochow University 2 Art College, Jinling Institute of Technology
Study on Melt Spinning of Shaped Hollow Polypropylene Fibers	G1-O-04	14:00	C. Prahsarn1, N. Srisawat2 and  N. Sumransin1	1National Metal and Materials Technology Center 2Department of Textile Engineering, Rajamangala University of Technology Thanyaburi
STUDY ON MODIFICATION OF COTTON BY SILK SERICIN	G3-P-44	Ⅰ	Xing Tie-ling1, Yao Ping2, Sheng Jia-yong1 and CHEN Guo-qiang1	1College of Textile & Clothing Engineering, Soochow University 2Suzhou Institute of Trade & Commerce
Study on Preparation and Flame Retardancy of Poly(ethylene terephthalate) / Montmorillonite Nanocomposites	G1-O-16	9:40	S.Habibi1, A.Rashidi2 and M.Shahvaziyan3	1Dep.of Textile Engineering, Islamic Azad University, Shahr-e-Rey Branch 2Dep.of Textile Engineering, Islamic Azad University, Science and Research Branch 3Dep.of Textile Engineering, Islamic Azad University, Yazd Branch
Study on properties of latex used for Textile Floorcovering treated by organoclay	G3-O-18	16:00	M.Shahvaziyan1, S.Habibi2 and S.M.Parvini Oskei1	1Dept. of Textile Engineering, Islamic Azad University,Yazd branch 2Dep. of Teachnical And engineering, Islamic Azad University, Shahr-e-Ray branch
Study on Self-Crimped TPO/PP Bicomponent Fibers	G1-P-20	Ⅱ	C. Prahsarn1, N. Srisawat2, W. Klinsukhon2 and P. Naksuwan2	1National Metal and Materials Technology Center 2Department of Textile Engineering, Rajamangala University of Technology Thanyaburi
Study on Solid Particle Erosion Behaviors of FRP Composites — effects of reinforcement fiber and nano fillers —	S1-P-09	Ⅰ, Ⅱ	Danna QIAN 1, Limin BAO 2, Masayuki TAKATERA 2 and Atsuhiko YAMANAKA 3	1 Department of Bioscience and Textile Technology, Interdisciplinary Graduate School of Science and Technology Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University 3 Research Center, Toyobo Co, Ltd.
Study on structure and properties of regenerated silk protein fiber	G1-P-05	Ⅱ	Xiaojie Guo	College of Material Science and Chemical Engineering , Tianjin Polytechnic  University
Study on the Application of the Sodium Percarbonate in Ramie Degumming	G2-P-08	Ⅰ	Guoliang Liu1, 2 and  Chongwen Yu 1, 2	1 College of Textiles, Donghua University 2 Key Laboratory of Science & Technology of Eco-Textile, Ministry of Education, Donghua University
Study on the Production of Spider Silk Proteins by Silkworm	SJ-O-08	11:40	Yuansong Zhang	College of Textile and Garment, Southwest University
Study on Youth's Sensory Evaluation of Color on Silk Clothing in China	G7-P-20	Ⅱ	Liu Guo-Lian, Wang Shan-Shan	College of Textile and clothing Engineering, Soochow University
Synthesis and Application of Alkyl-substituted Monoazo Red Dyes for Unmodified Polypropylene Fiber	G3-P-11	Ⅰ	Kyungjin Jang, Seonhee Jeon, Taekeong Kim and Namsik Yoon	Dept. of Textile System Engineering, College of Engineering, Kyungpook National University
Synthesis and Characterization of Biodegradable Network Poly(ester-urethane) Elastomers	G6-O-05	10:40	M. Nagata1, T. Sekiguchi2, W. Sakai2 and N. Tsutsumi2	1Dept. of Applied Life Sciences, Graduate School of Life and Environmental Sciences, Kyoto Prefectural University 2Dept. of Macromolecular Science & Engineering, Graduate School of Science and of Technology, Kyoto Institute of Technology
Synthesis and Characterization of Polyurethanes Based on MDI and Mixed Polyols of PTMEG/PDMS Diol	G1-P-04	Ⅰ	Sang Hee Ra1, Young Ho Kim1 and Heung Su Park2	1Department of Organic Materials and Fiber Engineering, Soongsil University 2Technical Support Team, Korea Textile Inspection and Testing Institute
Synthesis and characterization of thermo-responsive poly(N-isopropylacrylamide) grafted lyocell fibers	S8-KO-04	11:20	Fernando Carrillo Navarrete	INTEXTER and Chemical Engineering Department, Polytechnic University of Catalonia
Synthesis and crystallization behavior of Poly (oxyethylene-b-butylene succinate) Ionomers	G1-P-03	Ⅲ	Xian-Yu Jin, Sung-Yeon Hwang and Seung-Soon Im	Department of Fiber and Polymer Engineering,Hanyang University
Synthesis and dyeing properties of N-ethyl-2-hydroxynaphthalimide azo-N,N-diethyl-m-toluidine on polyester fabrics	G3-O-01	9:00	A. Khosravi1 and K. Gharanjig2	1Amirkabir University of Technology, Faculty of polymer and color engineering 2Islamic Azad University of Mahshahr, Faculty of polymer and color engineering
Synthesis and Dyeing Properties of Phthalocyanine-based Water Soluble Dyes	G3-P-15	Ⅱ	Seung Hee Park1, Young Do Kim2 and Jung Jin Lee1	1Dept. of Fiber System Engineering, Dankook University 2School of Material Science & Engineering, College of Engineering, Seoul National University
Synthesis and Evaluation of adhesive protein based on simple Tyr-Lys peptides sequence	G1-P-15	Ⅲ	JIN HEE LEE, Chang Seok Ki, Jong Wook Kim and Young Hwan Park	Department of Biosystems and Biomaterials Science and Engineering, Seoul National University
Synthesis and Optical properties of Tetrapyrazino- and Tetraquinoxalinoporphyrazines	G1-P-08	Ⅱ	D. K. Lee, M. S. Lee, C. K. Jang, S. H. Kim and J. Y. Jaung	Dept. of Fiber and Polymeric Engineering, Hanyang University
Synthesis of Bolaform Electrolytes Containing Aminomethylpyridine Structures and Their Application as Auxiliaries	S4-P-03	Ⅰ	M. Murashige, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Synthesis of Bolaform Electrolytes Containing Cyanopyridinium Cations and Their Properties	S4-P-01	Ⅱ	A. Ikeda, Y. Hirata, and K. Hamada	Faculty of Textile Science and Technology, Shinshu University
Synthesis of Peptide-Chitosan Conjugates for Novel Adhesive Materials	G5-O-14	15:20	Kazuhiro Koizumi1, Mikiko Nishibayashi1, Jun Araki2 and Kousaku Ohkawa1	1Institute of High Polymer Research, Faculty of Textile Science and Technology, Shinshu University 2International Young Researchers Empowerment Center, Shinshu University
Synthesis of Polybenzoxazole Derived From Aromatic Biomass	G1-P-06	Ⅲ	L. Y. Yang, K. Tsuchiya, S. Kajita, Y. Katayama, K. Shigehara and K. Ogino	Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agriculture and Technology
Synthesis of Quinoxaline Chemosensors and Electrospun Nanofibers Containing These Colorants	S3-O-15	17:00	C.K. Jang, M.S. Lee, J.Y. Jaung	Dept. of Fiber and Polymeric Engineering, Hanyang University
Synthesis of Thermoplastic Polyurethane and its Physical and Shape Memory Properties	G1-P-07	Ⅰ	Huei-Hsiung Wang	Department of Fiber and Composite Materials, Feng Chia University
Technology development of Bamboo fiber to Automotive parts	G6-P-11	Ⅲ	Seong Hun Kim, Hae Young Choi and Jun Tae Kang	Department of Fiber & Polymer Engineering, Hanyang University
Technology evaluation of PET nonwoven reinforced by recycled PP nonwoven selvedges	G2-P-37	Ⅲ	Ching Wen Lou1, Chih Yuan Kuo2, Pai Chen3, Wen Hao Hsing4 and Jia Horng Lin3,5	1Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University 3Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 4The Department of Textile Engineering, Chinese Culture University 5Graduate Institute of Chinese Medical Science, China Madical University
Tensile and Fatigue Behavior of Polyester Warp Knitted Fabric	G2-O-16	16:20	Mir Reza Taheri Otaghsara  , Ali A.A. Jeddi2 and Jamshid Aghazedeh Mohandesi3	1Textile Technology Research Group, Amirkabir University of Technology Branch , Iranian Academic Center for Research, Culture and Education (ACECR), Amirkabir University of Technology 2Department of Textile Engineering, Amirkabir University of Technology 3Department of Mining and Metallurgical Engineering, Amirkabir University of Technology
Tensile Performance of Coated Woven Fabric as Architectural Membrane under Multi-direction Load	SJ-O-02	9:20	Ding Xin	Donghua University
Tensile Properties of Polybenzimidazole/Carbon Nanotube Nanocomposite	S1-P-07	Ⅰ, Ⅱ	Li Zhang, Qing-Qing Ni, Toshiaki Natsuki	Faculty of Textile Science and Technology, Shinshu University
Textile Education in Iran	S5-KO-05	11:30	S.Shaikhzadeh Najar	Dept. of Textile Engineering, Amirkabir University of Technology(AUT)
Texture and Sensibility of Knit Fabrics according to Consumer Segmentation	G7-P-25	Ⅰ	Eui Kyung Roh 1 and Seong Hung Kim 2	1Dept. of Clothing & Textiles, Yonsei University 2Dept. of Polymer Science & Enginnering, Hanyang University
The Comparison of two different methods in the testing of the yarn evenness	G4-P-01	Ⅲ	ZhANG Dai-rong , ChENG Ling ,WANG Zi-qiang	School of Textile, Tianjin Polytechnic University
The Development and Application of Smart Garment Materials	G5-P-03	Ⅰ	L. Cao1, H. Liu2 and Y. Li2	1Institute of Art and Clothing, Tianjin Polytechnic University 2The Institute of Textiles, Tianjin Polytechnic University
The Dyeability of PEI(Polyethyleneimine) treated Cotton Fabric with Curcumin	G3-P-01	Ⅲ	Boyoung Lee1, Saebyul Park1 and Hyo-seon Ryu2	1Dept. of Clothing & Textiles, Graduate School of Human Ecology, Seoul National University 2Dept. of Clothing & Textiles, Graduate School of Human Ecology & Institue of Huma Ecology, Seoul National University
The Dynamic Drape Characteristics of Cotton Woven Fabrics with Forward and Reciprocating Rotations	G7-P-09	Ⅲ	Pin-Ning Wang1, Kou-Bin Cheng2 and Tien-Wei Shyr2	1Department of Material and Fiber, Nanya Institute of Technology 2Department of Fiber and Composite Materials, Feng Chia University
The Effect of Plasma Treatment of Glass Woven Fabric on the Interlaminar Shear Strength of Glass Fabric-Epoxy Composite	G4-O-06	11:00	H.Nosraty1 , M.Moradshahi2, H.Bahrami1and F.Bateni1	1Textil Engineering Department, Amirkabir University of Technology 2The Plasma Applied Research School
The effect of surface treatment of urethane groups in Poly (butylenes succinate) / MMT nanocomposites	G1-P-18	Ⅲ	Hwang Sung Yeon, Im Seung Soon	Department of Fiber and Polymer Engineering, College of Engineering, Hanyang University
The Effect of Yarn Twist on Fiber Migration and Fiber Configuration of Rotor-spun Lyocell Yarn	G2-O-07	11:20	F. Mohammadzadeh, S.Shaikzadeh Najar and S.M.Etrati	Dept. of Textile Engineering, Amirkabir University of Technology
The Effect of Yarn Twist on Fiber Migration and Fiber Configuration of Rotor-spun Lyocell Yarn	G2-P-29	Ⅰ	F. Mohammadzadeh, S.Shaikzadeh Najar and S.M.Etrati	Dept. of Textile Engineering, Amirkabir University of Technology
The Effective of Surface Resistivity with Processing Condition of PET/Metal-fiber Blended Yarn	G2-P-35	Ⅰ	Hung Jui Liang1, Pai Chen1, Jin Man Chen1, Ching Wen Lou2 and Jia Horng Lin1,3	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 3Graduate Institute of Chinese Medical Science, China Madical University
The Effects of Consumer's Apparel Experience And Subjective Knowledge on Information Search	G8-P-07	Ⅰ	Jeong In Hwang and Jae Ok Park	Department. of Clothing & Textile, College of Human Ecology, Hanyang University
The Effects of Fabric Structural and Sewing Factors to the Seam Puckering of the Wool/PET Fabrics	G7-O-11	16:00	S. J. Kim and K. S. Park	School of Textiles, Yeungnam University
The Effects of High Molecular Weight Component on Crystallization under Shear Flow	G1-P-42	Ⅲ	G. Matsuba1,2, K. Nishida1 and T. Kanaya1	1Institute for Chemical Research, Kyoto University 2Dept. of Polymer Science & Enginnering, Graduate School of Sciecne and Engineering, Yamagata University
The Effects of Quenching Parameters in The Fiber Spinning Process	G1-O-10	16:20	Yong-Dae Kim1, Siwoo Park1 and Du Hwan Chun2	1 Korea Textile Machinery Research Institute, Kyungsan
The Electronic Inspection System for Raw Silk Based on CompactRIO	G4-P-03	Ⅱ	Jia-li SHI, Qing-guan CHEN	Dept. of Textile Engineering, Jiangsu Key Laboratory of Silk Engineering, Soochow University
The improvement of music strings properties by using modern synthetic fibers	G5-P-19	Ⅱ	Dr/ O. Mohsen darwish	Spinning, weaving and knitting department, Faculty of Applied Arts, Helwan University
The Improvements of Coloration and Washing and Light Fastnesses by the Application of Smectite to Dyed Cotton Fabric	S4-P-02	Ⅲ	J. Jung1, M. Komaki and T. Satou2	1Dept. of Human Environmental Sciences, Life Sciences, Graduate School of Science, Ochanomizu University 2Kurosaki Hakudo Industries Co.,Ltd.
The influence of Chroma on the Perception of Clothes Colors	G7-P-21	Ⅲ	Jiang Xiao-feng1, Qin Fang1,2, Wang Shan-shan1, Liu- Guolian1	1College of Textile and Clothing Engineering, Soochow University 2Art school, Jingling institute of technology
The Influence of Different Concentrations of Initiators on the Grafting Ratio	G3-P-45	Ⅱ	H. Shi1, Z. Zhang2 , Z. Wu1, H. Liu1 and J. Zhou2	1The Institute of Textiles,Tianjin Polytechnic University 2Hebei University of Science and Technology
The Influence of Sportive Event to Local Sportswear Industry	G8-O-04	14:40	Min-Chen Wu, Chien-Teng Hsieh and Wei-Ming Ou	Dept. of Fashion Design and Merchandising, Shih Chien University Kaohsiung Campus Dept. of Marketing Management, Shih Chien University Kaohsiung Campus
The Influence of the age on the Buttoning Process of Boys	G7-O-09	15:00	N. Fukuda1, M. Takatera2 , T. Nishimatsu2 and Y. Matumoto2	1Dept. Of HomeEconomics Education, Graduate School of Education, Shinshu University 2 Dept. of Bioscience and Textile Technology, Graduate School of Sciecne and Technology, Shinshu University
The influence of the diameter of nanofiber by the bubbling method	S3-O-07	14:00	M. Matsumura1, T. Kimura1, H. Ino1, H. Inagaki1, Y. Kishimoto2	1Division of Advanced Fibro Science, Kyoto Institute of Technology 2HIROSE PAPER CO.,LTD
The influences of the proportion of low melting point PLA fiber and non-woven web on the mechanical and mircoleakage properties of dental filling material	G4-O-10	14:00	Tzu Hsuan Chao1, Po Ching Lu2, Chao Tsang Lu3, Ching Wen Lou4 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University 2Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 3Institute of Life Sciences, Central Taiwan University of Science and Technology 4Institute of Biomedical Engineering and Material Science / Center of General Education, Central Taiwan University of Science and Technology
The integration of Chinese aesthetics in appearance style management	G8-O-03	14:20	Derry Law, Joanne Yip and  Paulene Hsia	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
The Modification of Suit Paper Patterns	G7-O-04	11:40	K. Teng1, H. Liu1 and Y. Peng2	1The Institute of Textiles, Tianjin Polytechnic University 2The Institute of Art and Clothing, Tianjin Polytechnic University
The new 4-year undergraduate system and its impact to textile  education in Hong Kong	S5-KO-02	9:45	John H Xin	Institute of Textiles & Clothing, The Hong Kong Polytechnic University
The New Cell Wall Hydrolase Containing Two Domains, YomI, in Bacillus subtilis	S1-P-27	Ⅰ, Ⅱ	I P. Sudiarta1, T. Fukushima2, and J. Sekiguchi1,2	1Interdisciplinary Graduate School of Science and Technology, Shinshu University 2 Div. of Gene Res., Depart. of Life Science, Res. Center for Human and Environmental Science, Shinshu University
The Performance of Tencel Jacquard Fabric with Ginkgo Biloba Extract  Finishing for Bedclothes	G3-P-41	Ⅰ	Y.J Jang1 and J.S Lee2	1Dept. of Bioscience and Textiles Technology, Interdisciplinary Graduate School of Science and Technology, Shinshu University 2Dept. of Clothing and Textiles, Chungnam National University
The Physical Properties of Nylon High Hollow Filament According to the Elution Conditions	G1-P-27	Ⅲ	S. J. Kim1, J. H. Park1, J. M. Kang2 and J. W. Lee3	1School of Textiles, Yeungnam University 2Korea Textile Development Institute 3Won Chang Co. Ltd.
The Possibility of FRP Recycling by Overheated Vapor and the Mechanical Property of Recycled Glass Fiber	G4-P-16	Ⅲ	Jian SHI 1, Limin BAO 2 and  Shougo WADA 3	1Functional Machinery and Mechanics, Graduate School of Science and Technology Shinshu University 2 Faculty of Textile Science and Technology, Shinshu University 3 Functional Machinery and Mechanics, Faculty of Textile Science and Technology, Shinshu University
The Preparation and Properties Analysis of Polyester Fabrics/Polypropylene Thermoplastic Composites	G4-O-04	10:00	Ting Wei Chang1, Ching Wen Lou2, Chien Teng Hsieh3 and Jia Horng Lin4	1Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 3Department of Fashion Design and Merchandising, Shih Chien University 4Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University
The processing of a recombinant collagen-like protein for tissue engineering	S1-P-23	Ⅰ, Ⅱ	Yuan Li, Xuxu Bao, A Teramoto, K Abe	Department of Functional Polymer, Faculty of Textile Science & Technology, Shinshu University
The Relation among Body Measurements as the Basis of a Grading Methods - In the Case of Young Female Upper Torsos –	G7-P-08	Ⅱ	H.Takabu, S. Odajima, T. Matsumoto and S. Takahashi	Dept. of Human Environmental Sciences, Faculty of Human Life Sciences, Jissen Women's University
The relationship between the clothing pressure and the fabric tension	G7-O-07	14:20	Chen Zhi-ge and Chen Qin-guan	Dept. of Clothing Design and Engineering, College of Textile and Clothing Engineering, Soochow  University
The research on the absorption benefit of electromagnetic wave with changing the direction of the spiral-shaped composite plate	G5-P-18	Ⅰ	P. H. Chu 1 K. C. Lee 1 W. Y. Chang2	1Department of Textile Engineering, Chinese Culture University 2Institute of Materials Science and Nanotechnology, Chinese Culture University
The Research on the Radiation of the Far-infrared Polyester Fabric under Different Environment Relative Humidity and Moisture Content	G5-O-17	16:20	P.Y. Wu1 Y.H.Liou2 W.H. Hsing1 J.M. Lin3	1Department of Textile Engineering, Chinese Culture University 2Institute of Materials Science and Nanotechnology, Chinese Culture University 3Taiwan Far Infared Rays Association
The research on the Stability of Radiation Rate measurement from the impact of Weight and Arrangement Type of Far-Infrared fibers	G5-O-16	16:00	Y.L. Hsing1, W.H. Hsing2, K.W. Zeng2 and R.S. Yao3	1Institute of Information Management, Tatung University 2Department of Textile Engineering, Chinese Culture University 3Taiwan Textile Research Institute
The Soilless Culture Mediums Form With Polyester Hollow 3D Crimp Fiber Of Nonwoven Process Technology Assessment	G2-O-31	14:20	Cheng Fang Tasi 1, You Cheng Liao1, Ching Wen Lin2, Ching Wen Lou3 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Graduate Institute of Fashion Design, Ling Tung University 3Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
The Stability of Far-Infrared Emissivity of the Homogeneity Material	G5-O-07	11:20	J.R Pan1 P.Y Wu1 Y.S Liou2 W.H. Hsing1 J.M. Lin3	1Department of Textile Engineering, Chinese Culture University 2Institute of Materials Science and Nanotechnology, Chinese Culture University 3Taiwan Far Infrared Rays Association
The Status and Trend of Textile Education in China	S5-KO-04	11:00	R. Wang	College of Textile, Tianjin Polytechnic University
The Structure Design and Effective Evaluation of Electromagnetic Shielding Complex Knitted	G2-P-32	Ⅰ	Wei Ting Wang1, An Pang Chen1, Ching Wen Lou2 and Jia Horng Lin1	1Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University 2Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology
The Study of Acoustic and Filtration Properties of Nano Fiber Net by Electrospinning	S3-P-02	Ⅱ	Y.A. Teng1, H.Y Huang2, C.S. Wu1	1Graduate School of Textile Engineering, Feng-Chia University 2Hsin-Kuo University
The Study of Combustion Behaviors of Train Interior Textiles	G2-O-21	9:00	Y. C. Chang, L. C. Wang and G. T. Jou	Taiwan Textile Research Institute
The study of comfort factors of foundation garment and subjective pressure sensation evaluation	G7-P-17	Ⅱ	Li Liu1,2, Wei yuan Zhang2, Li Zhao2	1Fashion Institute, Donghua University 2The school of fashion art and engineering, Beijing Institute of Fashion Technology
The Study of Crimping Property of Self-bulking Fiber	G1-O-13	17:20	Lin, W.P. and An, T.C.	Department of Raw Materials and Yarns, Taiwan Textile Research Institute
The Study of TMAH Permeation Through Protective Rubber	G1-O-20	11:20	Y. C. Chen1, C. I. Su1, J. W. Dai1 and L.W. Lin2	1Graduate School of Polymer Engineering, National Taiwan University of Science and Technology 2Division of Occupational Hygiene Institute of Occupational Safety and Health
The Study on the Low K of PTFE film With Hollow Glass Spheres	G1-P-37	Ⅰ	I.S. Tsai, Y.C. Kuo	Nano technology Labouratory, Graduate Institute of Textile Engineering, Feng Chia University
The study to develop DNA markers that are effective for breeding programs of head vegetables	S1-P-31	Ⅰ, Ⅱ	Daisuke Aruga1, Nobuaki Hayasida2	1 Department of Bioscience and Textile Technology, Shinshu University 2 Division of Applied Biology, Faculty of Textile Science & Technology, Shinshu University
The Synergistic Effect between Inorganic Fillers and Phosphorus-based Flame Retardants on the Flame Retardancy of Styrenic Resin	G3-P-28	Ⅲ	Juhea Kim  and Mi Yeon Kwon	Textile Fusion Technology R&D Department, Fusion Technology R&D Division, Korea Institute of Industrial Technology
The Synthesis and Spectra Analysis of 2,3-Dihydroxynaphthalene Azo Dyes	G3-P-16	Ⅲ	S. M. Lin1, J. W. Chen1, W.G. Kuo2, S.K. Liao3, C.P. Chang2 and M.C. Huang1	1Department of Materials and Textiles, Oriental Institute of Technology 2Department of Textile Engineering, Faculty of Engineering, Chinese Culture University 3Department of Fiber and Composite Materials, Feng Chia University
The technique and characteristic on Modification for Polylactic Acid/ β-TCP/ Chitosan biomimetic Scaffold	G4-O-13	15:00	Po Jen Lai1, Chao Tsang.Lu2, Ching Wen.Lou1 and Jia Horng. Lin3	1Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Institute of Life Sciences, Central Taiwan University of Science and Technology 3Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University
The Technique and Physical Properties of Carbon Fiber/ Glass Fiber/ PP Plastic Composites	G2-O-34	15:20	Kuo Chen Chang1 Ching Wen Lou1 Guo Dong Long2 and Jia Horng Lin3	1Center for General Education/ Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology 2Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University 3Laboratory of Fiber Application and Manufacturing, Graduated Institute of Textile Engineering, Feng Chia University
The Thermal Insulation Performance of Polar Fleece	G2-P-10	Ⅲ	Y. Li, H. Liu and G. Song	The Institute of Textiles, Tianjin Polytechnic University
The visual effect of flare skirts with various fabrics	G2-P-27	Ⅱ	Hyun- ah Kim, Joo- hyun Lee , Hyo -Seon Ryu and Yun -ja Nam	Dept. of Clothing & Textiles, Graduate School of Ecology, Seoul National University
Theoretical Basis of Dual mode Diffusion of NaCl in Non-penetrating Porous Materials-Foodstuffs as the Model	S4-P-14	Ⅲ	H. Hashiba1, H. Gocho2 and J. Komiyama3	1Dept. of Food & Nutrition, Faculty of Health & Nutrition, Tokyo Seiei College 2Dept. of Human Environmental Sciences, Faculty of Human Life Sciences, Jissen Women's University 3Prof. emeritus, Tokyo Institute of Technology
Thermal Expansion Coefficients of 3D Braided Carbon/epoxy Composites	G4-P-05	Ⅰ	Y. Wang1, L. Chen1 and H. Liu2	1The Institute of Composite Materials, Tianjin Polytechnic University, 2The Institute of Textiles, Tianjin Polytechnic University
Thermal Properties of Heated Slippers in the Cool Office	G7-P-11	Ⅱ	Y. Kwon and M. Kang	Div. of Fashion Industry, Silla University
Thermal Properties of Liquid Crystalline Dendritic and Branched Polymers	G5-P-27	Ⅰ	H. Takebayashi, Y.MASUDA, and S UJⅡE	Dept. of Applied Chemistry, Faculty of Engineering, Oita University
Thermal Property and Melt Rheology of Poly(L-lactic acid) Containing a Small Amount of D-lactic Acid Chains	G6-O-06	11:00	Hideki YAMANE1,  Takahiro Doi2, Zhen TANG3, Kenzo OKAMOTO4, and Masayuki YAMAGUCHI4	1Center for Fiber and Textile Science, Kyoto Institute of Technology 2Graduate School of Science and Technology, Kyoto Institute of Technology 3Musashino Chemical Lab. Ltd. 4Japan Advanced Institute of Science and Technology
Thermodynamic analysis of dyeing adsorption characteristic of modified Lyocell fibers by enzymatic and caustic pre-treatments	G3-P-04	Ⅲ	Yi-Jun Pan1, Chien-Kuo Yen1, Chien-Teng Hsieh2 and R. H. Wardman3	1Department of Textiles and Materials, Oriental Institute of Technology 2Department of Fashion Design and Merchandising, Kaohsiung Campus, Shih Chien University 3School of Textiles & Design, Heriot-Watt University
Thermodynamics Description of Moderately Concentrated Polymer Solution Based on Scaling Law: Application of Vapor Pressure Osmometry	G1-P-43	Ⅰ	M. Karimi	Dept. of Textile Engineering, Amirkabir University of Technology
Thermomechanical analysis of smart braided stent using thermal-induced shape memory polyurethane	G5-P-11	Ⅲ	Tae Jin Kang, Ju Hyun Kim and Woong Ryeol Yu	Intelligent Textile System Research Center and School of Materials Science and Engineering, Seoul National University
Three-Component Sirofil Yarn Blended by Silver-plated Filament / Cotton	G2-P-04	Ⅲ	S. Zhang1, X.Li2 , L.Chen1 and H. Liu3	1MEKL of Advanced Textile Composite Materials, Institute of Texitile Composties, Tianjin Polytechnic University 2Department of Textile and Garments, Hebei University of Science and Technology 3The Institute of Textiles, Tianjin Polytechnic University
Total Quality assessment of  Fabric layers System using for Surgeon' Protective Clothing	G7-O-13	16:40	Vu Thi Hong Khanh1, Nhu Thi kim Chung2	1Faculty of Textile-Garment and Fashion Design, Hanoi University of Technology 2Hung Yen Engineering Pedagogic University
Toward A Collaborative Design Framework for Worldwide Fashion Supply Activities	G8-O-02	14:00	C.K-m. To, Z. Zhang, L.K. Chan and K.B. Ko	Institute of Textiles and Clothing, The Hong Kong Polytechnic University
Towards application of aquatic insect silk for restoration of river ecosystems: microstructure of the nest material	S1-P-11	Ⅰ, Ⅱ	E. Inoue1, M. Tsukada1 and K. Hirabayashi1	1Division of Applied Biology, Faculty of Textile Science and Technology, Shinshu University
Tribological Tests of Nanofiber Web Fabricated by Electro-spinning Method	S3-P-04	Ⅰ	T. Sudo1, T. Yamabe1, I.S. Kim1, and Y. Enomoto1,2	1Faculty of Textile Science and Technology, Shinshu University 2Toyama Industrial Technology Center
Two-component Organogelators of L-Lysine Derivatives	S3-P-01	Ⅰ	M. Suzuki, H. Saito and K. Hanabusa	Graduate School of Science and Technology, Shinshu University
Ultra-porous Aerogel contained Flexible PET Nonwovens for Sound Absorption	G5-P-20	Ⅲ	Kyung Wha Oh1, Duk Ki Kim2, and Seong Hun Kim2	1Department of Home Economics Education, Chung-Ang University 2Department of Fiber and Polymer Engineering, Hanyang University
Ultraviolet Protection of Knitwear Fabric	G2-O-17	16:40	Polly Chiu and Jimmy K.C. Lam	Institute of Textiles & Clothing, The Hong Kong Polytechnic University
Using Gray Theory to Predict the Trends of Synthetic Fiber Market Requirement in Taiwan	G8-P-02	Ⅱ	Chien-Teng Hsieh1, Mei-Ning Huang1, Yi-Jun Pan2, Hung-Min Tu	1Dept. of Fashion Design and Merchandising, Kaohsiung Campus, Shih Chien University 2Dept. of Textiles and Materials, Oriental Institute of Technologe
Using Image Processing to Investigate Yarn Structure and Related Physical and Mechanical Yarn Properties	G2-P-06	Ⅱ	M.Salehi and M.S.Johari	Textile Engineering Department, Amirkabir University of Technology
Validation of the Friction Bundling Dynamics by the Frequency Response Method	G2-O-09	13:40	Jung H. Lim1, Jong S. Kim2, and You Huh3	1Department of Textile Engineering, Graduate School, KyungHee University 2College of Engineering, KyungHee University 3Deparment of Mechanical Engineering, KyungHee University
Viscosity Change of Aqueous Hectorite Suspension on Applying an Electric Field	G5-P-26	Ⅲ	H. Kimura, S. Takahashi and A. Tsuchida	Dept. of Chemistry, Faculty of Engineering, Gifu University
Wear Comfort of Double-layer Knit with PLA	G7-P-19	Ⅰ	M.Ukaji1, Y.Kobayashi1,  S.Kimura1, S.Kagawa1,  M.Fujisawa1, C.Mizutani1, T.Hongu2 and K.Kajiwara3	1Dept. of Textile an d Clothing, Otsuma Women's University 2Reserch & Development Planning Section ,TEIJN FIBERS LIMITED 3 Research Center for Textile Scienc, Kyoto Institute of Technology & NanoFIC, Shinshu University
Wood Colouring by Oxidation Dyes and Effect of Additives	S8-P-02	Ⅱ	Shibata, A.; Yasunaga, H.; Urakawa, H.	Kyoto Institute of Technology, Department of Chemistry and Materials Technology